MC-54/MC54B Parts Cross Reference List.

[madmanjustice]

The purpose of this list is to make finding replacement parts for the MC54 and its many different incarnations easier to find. It should also reduce common questions like (what is the spark plug for so and so scooter)

I'm going to start with some simple categories and flesh out the list from there. If you have something you would like to add to the list, post it (with links to where it can be purchased) and I'll add the info to the master list in this thread. Also, since these scooters come with two different engines, if you have an engine specific part, please indicate which engine it is for.

All links below are for reference and are not an endorsement of the sellers!

Various body panels and other replacement parts are available from Motosportparts.com and they ship pretty fast.

Tires stock size - 130/60-13 (front and rear)
Michelin
Pilot Sport @ Ridenow
Pirelli
SL26 @ Ridenow
Avon
Viper Stryke @ Ridenow
Kenda

Spark Plug
NGK - IRIDIUM plug - DR8EIX - (CFMoto engine)
NGK - IRIDIUM plug - DR8EIX - (Linhai engine)
E3 Diamond Fire - E3.36 (both)

Windshield
Honda
Reflex OEM Replacement - Bike Bandit part # 934813-001
Reflex Sport OEM Replacement - Bike Bandit part # 2922002-001
Givi
Honda Reflex Replacement - 25 inch - 29 inch
Cee Baileys
Honda Reflex replacement shield in various sizes link

Brakes
1996 Honda Rebel front brake pads have been cross referenced as a replacement for the stock pads.
Honda OEM - w/hook - Bike Bandit part # 184946-001
EBC Sport Carbon Graphite X Pads LINK

Oil and Drain Plugs - CFMoto
The Oil/Screen cover and drain plug from the 2007 Honda Helix are direct replacements for the china part. Can be purchased online from Bike Bandit or ordered from any Honda dealer. (make sure that you order the O ring with the Screen cover as it is a seperate item.

Fuel Pump
Mikuni replacement fuel pump (non electrical)


Front wheel bearings
The stock part number is 6301rs and can be purchased from www.vxb.com
or at Orielys part #301 ss made by federal mogul

Spare Key

Spare key - Ilco blank for a toyota ,has two numbers on it- x137 and tr33 fit perfect in ignition and seat lock had to mill thickness just a hair for the glove box and gas fill door.

Variator

Clutch

Lights
Stock replacements
Tail/brake lights = 1157
Turn Signals = 1156
LED replacements

------------------------------------------------------

Please contribute to the list... I believe the VOG 260/MC62 (and its variants can be included as well)

[glassvial]

NGK spark plug for the Linhai motor is DR8EIX, Advanced Auto Parts (and many other stores) part/stock number 6681, most stores can special order it for you and there's no shipping charge.

LED's, 2 x 1157 red for the brake lights, 4 x 1156 amber for the front/rear turn signals, the rest are optional. People have reported good luck with this ebay seller (note I am not this seller nor am I recommending him/her, just passing along information I've found in this forum prior):

motors.shop.ebay.com/merchant/warden_jp2002

Cee Bailey's windshield (expensive):

www.ceebaileys.com/honda/hondareflexws.html

Hope that at least gets you started.

[HarmZway]

I bought the led's from
stores.ebay.com/US-Home-Direct
and got them fast. I got the spark plug from amazon:
www.amazon.com/NGK-DR8EIX-Iridium-Spark-Plug/dp/B000COTP9Q/ref=sr_1_1?ie=UTF8&s=automotive&qid=1217448591&sr=8-1 pretty cheap and fast.
I've gotten some other stuff I'll list later after I get my scooter and install them and see how well they work!

[madmanjustice]

thanks for the input guys, the more the better.

I'm still gathering info as well.

[glassvial]

Jul 30, 2008 15:12:25 GMT -5 HarmZway said:

I bought the led's from
stores.ebay.com/US-Home-Direct
and got them fast.

Let us know on the LED's, I don't even see any SMD LED's for sale from those guys

Another site for LED's that's been suggested on this forum:

www.v-leds.com/

Good information if nothing else, relatively expensive, though.

Also might have a lead on some 45W stock replacement headlights...no funny business changing wires out or messing with half-ass HID kits, but not going to elaborate further until I order/try them first though. If they're crap, no sense in getting any.

[luckeydawg]

Good job madman, (throwin a bone) keep it up!! And yes the ceebailey w/s is a little steep but it works sooooooo well.....I love mine....

[Highlander]

I have found the Yamaha "Morphous" sold at most Yamaha shops have identical engine, carb etc. parts to my mc54 250 Linhai/Cypress, true B- to be an option for all parts and replacements. Not body style, but running parts.

[rcq78]

So Madmanjustice,are you saying them brakepads from bikebandit will fit the MC-54-250B?
Thats both front & back??? I don't need any right now,but would like to know where to get them when I do....I've already up graded to leds... Bob

[earlwb]

Yeah a 96 or 97 Honda Rebel Brake pads will work on most of the MC54-250B types of scooters. They all use the same generic calipers.
Here is the original thread about it here:
powerscooters.org/cgi-bin/discuss/YaBB.pl?num=1216699233

[mollymil]

Excellent thread!! Thanks a ton...have a bone, for the thread and the "Bad Wolf"...

though it likely has nothing to do with the TARDIS...

[madmanjustice]

Aug 1, 2008 10:55:56 GMT -5 mollymil said:

Excellent thread!! Thanks a ton...have a bone, for the thread and the "Bad Wolf"...

though it likely has nothing to do with the TARDIS...

oh, you never know...

[cabanaman]

Aug 1, 2008 10:55:56 GMT -5 mollymil said:

Excellent thread!! Thanks a ton...have a bone, for the thread and the "Bad Wolf"...

though it likely has nothing to do with the TARDIS...

EXTERMINATE EXTERMINATE

[mg]

Sources for the bolt on type carb for the mc54B. Partsprousa.com $125, Bandit-motorsports.com, $109,unless they've gone up since I ordered one. A good source for led's, is superbright leds.com. For an intermittent flashing led bar(flashes 5 times when you apply the brakes) knightrider.com.

[mafunsalow]

Aug 1, 2008 9:17:08 GMT -5 Highlander said:

I have found the Yamaha "Morphous" sold at most Yamaha shops have identical engine, carb etc. parts to my mc54 250 Linhai/Cypress, true B- to be an option for all parts and replacements. Not body style, but running parts.

Not sure about all body parts ,but I just got the handle bar cover and side pieces for a reflex and they are a perfect fit.
Also I belive the Reflex's CDi is usable on the -B

[Highlander]

mafunsalow
Fantastic! thanks for letting me know. Keep me infomed about any other parts that are compatable.
david

[fflintstone]

This place is advertising chrome parts for your scooter--I haven't ordered anything yet--just got mine 3 weeks ago--
good luck-ff
scooterchromeparts.googlepages.com/home214

[fflintstone]

I posted on another thread about this--for balancing tires --I don't know if this belongs here ,but since I have tried this stuff ,I can say it does help a lot and here is the link-ff
www.evolutioncycles.com/order.htm

[earlwb]

The windshield for the Honda Reflex fits good, no problems. There is a aftermarket source for windshields that make them wider or taller too.

There is a really good chance that the body parts for a Honda Reflex will work Ok, but no one has really bought the panels and tried to bolt them on yet.

[madmanjustice]

Aug 5, 2008 13:54:53 GMT -5 earlwb said:

The windshield for the Honda Reflex fits good, no problems. There is a aftermarket source for windshields that make them wider or taller too.

There is a really good chance that the body parts for a Honda Reflex will work Ok, but no one has really bought the panels and tried to bolt them on yet.

We have the windshields listed above and mafunsalow has fitted some Reflex body parts

[spot]

anyone know the part number of the seat bumper ?

(under the front of the seat there seems to be a place for 2).

My 250B has 1 (that fell off when I first lifted the seat)

its a rubber cylinder that is about a inch in diameter and about 1.5 inches tall with a nipple that has a shoulder on it that 'holds' it to the seat bottom - the bumper then rests on the sides near the battery cover when the seat is down - probably so the weight of the rider on the front of the seat is not on top of the battery.

[kraziedn]

the honda helix/ reflex clutch is a direct replacement for our MC-54. For better acceleration and top end speed, Melossi Delta Clutch Maxi is a very good alternative. I replaced my stock clutch with the Melossi's and i notice a big difference in acceleration and top speed.

[glassvial]

You mean like this (Malossi, that is)?

www.scootershop.com/catalog/product_info.php?manufacturers_id=34&products_id=998&osCsid=34f4eeb0edf1cbfaeca46e36d9ec1539

$300, ouch.

[kraziedn]

Aug 10, 2008 9:25:07 GMT -5 glassvial said:

You mean like this (Malossi, that is)?

www.scootershop.com/catalog/product_info.php?manufacturers_id=34&products_id=998&osCsid=34f4eeb0edf1cbfaeca46e36d9ec1539

$300, ouch.

it's $150 on ebay
cgi.ebay.com/ebaymotors/MALOSSI-Performance-CN250-Honda-Helix-Adjustable-Clutch_W0QQcmdZViewItemQQcategoryZ35600QQihZ017QQitemZ270263035868QQrdZ1QQsspagenameZWDVW

[maxximo]

Can that Clutch work for the 250b too?

[kraziedn]

Aug 12, 2008 2:04:19 GMT -5 maxximo said:

Can that Clutch work for the 250b too?

yes sir, it fits both cfmotto and linhai engine fine.

[wiley]

I purchased a Mc54 -250B. It is a 2008 model. Can anyone tell me the true horsepower rating? I ordered the Machoman 260.

[glassvial]

Aug 12, 2008 13:54:56 GMT -5 wiley said:

I purchased a Mc54 -250B. It is a 2008 model. Can anyone tell me the true horsepower rating? I ordered the Machoman 260.

How about starting a new thread, this thread is regarding parts cross references.

[jack]

The clutch on the MC54B is different than the MC54. The clutch referenced for the CN250 will only fit on the MC54 not on the MC54B.

[luckeydawg]

Hey guys where can I get a new enricher???

[frolz]

I think the Iridium plug for the CFmoto engine should be either (NGK) DPR7EIX-9 or (Denso) X22EPR-U9IX22B.
I bought the NGK 7544(CR7HIX) and the thread diameter is far too small.