|
|
Post by musicman on Apr 9, 2009 10:26:22 GMT -5
|
|
|
|
Post by musicman on Apr 9, 2009 10:27:30 GMT -5
|
|
|
|
Post by widehide on May 10, 2009 16:44:42 GMT -5
These work great , vogger was right, BRAKE Pads are for the front and rear of the VOG260 and only the rear of my MC54B , Real cheap look here, I got 2 sets for only $21.30 delivered. They got here on the 5th day. Here is a picture.  www.scooterpart.net/products.php?id=1385Also these are more expensive possibly better Brake pads, Kymco 96.90x41.95x9.29/76.91x41.81x9.19 Part No: 1000-1021 one set Price: $14.99 www.scooterworks.com |
|
|
|
Post by lifedoc on Jun 14, 2009 9:59:50 GMT -5
I have had this Roketa Machoman 260 for nearly a year now, and still can't trust it. I've replaced all hoses, etc, but it still will suddenly just totally stop running at road speeds, but not all the time. I recently drove a 45 mile round trip, and absolutely no problems. Then went about 7 miles, and it totally shut down. It usually starts back up, but sometimes has to cool down first. It did have fuel problems at first, but now I think it may be the coil (if there is one), or the CDI unit. Right now, it doesn't start at all; won't even "kick". When it shuts down, it's like turning a light switch off -- it doesn't sputter, just shuts down.
Where can I get a new CDI unit, and/or coil? I really do think this might solve the problem. I like the scoot otherwise.
|
|
|
|
Post by glassvial on Jun 18, 2009 11:36:24 GMT -5
I have had this Roketa Machoman 260 for nearly a year now, and still can't trust it. I've replaced all hoses, etc, but it still will suddenly just totally stop running at road speeds, but not all the time. I recently drove a 45 mile round trip, and absolutely no problems. Then went about 7 miles, and it totally shut down. It usually starts back up, but sometimes has to cool down first. It did have fuel problems at first, but now I think it may be the coil (if there is one), or the CDI unit. Right now, it doesn't start at all; won't even "kick". When it shuts down, it's like turning a light switch off -- it doesn't sputter, just shuts down. Where can I get a new CDI unit, and/or coil? I really do think this might solve the problem. I like the scoot otherwise. Sounds like you should start a new thread for your issue, but here's a dumb question, have you done valve/carb adjustments? |
|
|
|
Post by tconick on Jun 26, 2009 13:15:56 GMT -5
I'm having the same problem and appears to only happen on a really hot day after riding 20 minutes. went totally dead and after cooling down was fine. I too am suspecting a CDI.
|
|
|
|
Post by kaysimms1226 on Jul 1, 2009 10:12:17 GMT -5
I have a Roketa MC-54 250 cc scooter and I am having some problems with it. It will crank, but won't idle. Goes dead. We have checked every fitting to make sure there is no pressure loss, but still can't get it to stay cranked. Anyone had any problem like this? If so, how did you fix it? Thanks in advance.
|
|
|
|
Post by tconick on Jul 3, 2009 9:10:59 GMT -5
Sounds typical of a fuel problem, not so much a pump, but maybe the carb or enricher.
|
|
|
|
Post by tconick on Jul 6, 2009 9:06:51 GMT -5
NGK and other foriegn plugs are opposite in heat range numbers compared to the U.S. Unlike U.S. the lower Number being a cooler plug, NGK is a higher number for a cooler plug.
|
|
|
|
Post by smorkle on Jul 17, 2009 20:24:15 GMT -5
I discovered touch up paint for the '08 MC-54-250B Blue that matches EXACTLY at Wal Mart. I found it in the automotive section where they keep touch up paint for cars. I just went to wal mart and looked at the stuff and found one I thought would be close and it was friggin exact. Wild. Cost was $5.77 The BLUE I found was Dupli-Color brand "Electron Blue Peral" HA 00980 B95-P Honda A Link to the web site of the product is www.duplicolor.com They have a tool on their web site for matching your paint color.  |
|
|
|
Post by boogernose on Jul 26, 2009 11:39:10 GMT -5
umm kids this is the cross reference section NOT THE PROBLEM SOLVING SECTION
|
|
|
|
Post by smorkle on Jul 29, 2009 20:36:17 GMT -5
|
|
|
|
Post by breadpazoid on Jul 30, 2009 20:21:32 GMT -5
Is there a cross referenced (or cross reference-able) bolt out there that I can use to mount the rotor for the 54B rear wheel? If so, who would carry something like that? Are there other scooters that use the same size? That's the only thing standing between me and the road at this point. I'll order it from Roketa if I have to but I'd love to be on the road sooner than the end of next week. lol. The parts diagram describes the bolt as such: Someone translate please. LOL I received my lovely new hub today (thanks to a swap with Rockin Ran - yay!), got the tire mounted, and was trying to undo the bolts mounting the rotor to the rear wheel. I felt like I was using an incorrect size (not to mention it was ferociously tight!) and it was threatening to round off, so I took the whole thing to Kragen and the damn bolts were on so tight that it was rounding off their allen wrenches.  I took it to the tire shop that fixed my valve stems and they were willing to drill them out. They warned me that they would probably not be able to save the bolts and I said that's fine, just as long as I can reuse the rotor. So 15 minutes later, I have a spiffy new rotorless wheel with Viper Stryke tire mounted, a useless old rotorless wheel with a Kenda tire that, in comparison, looks like a diseased donut, and a lonely rotor with no bolts.
EDIT: Answered my own question. Honda dealerships have 8x25 bolts en masse (phew). I had a feeling this would be the case due to the whole Reflex clone thing. |
|
|
|
Post by zrnjones on Aug 5, 2009 14:42:34 GMT -5
Excellent thread!! Thanks a ton...have a bone, for the thread and the "Bad Wolf"... though it likely has nothing to do with the TARDIS... EXTERMINATE EXTERMINATE  |
|
|
|
Post by zrnjones on Aug 5, 2009 14:42:51 GMT -5
Excellent thread!! Thanks a ton...have a bone, for the thread and the "Bad Wolf"... though it likely has nothing to do with the TARDIS... EXTERMINATE EXTERMINATE |
|
|
|
Post by musicman on Aug 23, 2009 22:26:51 GMT -5
Oil Plug Stolen off my 257 Linhai 250B. Anyone know where to order a replacement or a cross-ref ??
|
|
|
|
Post by musicman on Aug 23, 2009 22:29:34 GMT -5
I should specify that it's the filler plug with the dip stick gauge
|
|
|
|
Post by smorkle on Aug 27, 2009 21:00:00 GMT -5
|
|
|
|
Post by JR on Aug 27, 2009 21:31:29 GMT -5
|
|
|
|
Post by musicman on Aug 30, 2009 9:33:15 GMT -5
Yep , That's the oil filler plug alright. Thanks Smorle. hey jrryan that's a great link for a manual. Certainly beats what came with my scoot.
|
|
blue2
Junior Dawg
Posts: 7
|
Post by blue2 on Sept 5, 2009 7:10:02 GMT -5
 Hey, how about a rear wheel replacement for a MP-250a JCL(seeing as I hit a "bump" recently)?
|
|
|
|
Post by Big Jim on Sept 8, 2009 10:17:26 GMT -5
Greetings,
Anyone have a cross reference for Rok MC54B Battery. Been on line and haven't found Roketa listed in parts listing for motorcycle batteries. I've looked at auto parts stores like Auto Zone, J C Whitney, OReilly, and Walmart. They usually have Yamaha listed, but would Roketa use same battery?
Thanks in advance!
Big Jim
|
|
|
|
Post by madmanjustice on Sept 8, 2009 14:02:15 GMT -5
battery is a standard 9BS which is available from Wal-Mart in their powersport batteries section.
The MAXX AGM is a good choice.
|
|
|
|
Post by Big Jim on Sept 9, 2009 8:09:44 GMT -5
Thanks, Big Jim
|
|
|
|
Post by bhudson462 on Sept 18, 2009 9:28:34 GMT -5
where can i find a gear driven sproket for a cyprus 250cc 54B engine oil pump
|
|
|
|
Post by JR on Oct 13, 2009 12:11:14 GMT -5
|
|
|
|
Post by JR on Oct 22, 2009 8:14:01 GMT -5
|
|
|
|
Post by ScooterRider on Nov 20, 2009 3:07:55 GMT -5
Variator takes 20x12 Rollers or Slider weights (8 of them) with Linhai engine
|
|
|
|
Post by scooterpastmaster on Dec 10, 2009 14:23:58 GMT -5
Can somone please tell me where I can buy a stator for a mc54b with a linahi/yamaha engine?! I have searched months for the correct one, ordered about three that I thought would fit though no success.
|
|
|
|
Post by "Big Guy" on Dec 10, 2009 14:36:54 GMT -5
Can somone please tell me where I can buy a stator for a mc54b with a linahi/yamaha engine?! I have searched months for the correct one, ordered about three that I thought would fit though no success. Search no more... Just click here... -Rich |
|
Hey, how about a rear wheel replacement for a MP-250a JCL(seeing as I hit a "bump" recently)?
