|
|
Post by rusty on Feb 23, 2008 10:59:36 GMT -5
Getting ready to order my MC-62 in Black or Red, but I am wanting to change all the bulbs to LED lights, will keep the orig. headlights, but I need a diagram to go ahead and get the LED's on order, could use any help on this matter
Thanks
Rusty
|
|
|
|
Post by scooterollie on Feb 23, 2008 12:46:47 GMT -5
Rusty,
I might recommend you wait until you get the scooter. LED bulbs come in several designs and you need to eyeball the reflector to know which might work best with your scoot. I just went through this with the tail/stop light bulbs for my Linhai 300. Even though I had the scoot in my possession, turns out a different design bulb might catch more of the reflector with the side facing LEDs. I bought a good quality 32 LED bulb and it is not as bright as the filament-style bulb! In addition, some styles of LED bulbs won't fit through the hole in the rear of the module and some won't even fit in the space available inside the reflector.
|
|
|
|
Post by indy50 on Feb 23, 2008 13:24:24 GMT -5
You can obtain a wiring diagram at Roketa.com, all you have to do is select your model and there is a place to click for wd then print it.
|
|
|
|
Post by rusty on Feb 23, 2008 14:15:16 GMT -5
Thanks for all the info, you are right about wateing on the scoo to be sure about whick LED's i can use. Just trying to get it ready to ride as soon as i can.
I will try out the Roketa web page, I want a diagram any way if i have any electrical problems. Looking forward on getting a new scoot
|
|
|
|
Post by rusty on Feb 23, 2008 14:21:56 GMT -5
I tried Roketa. com and coule not find any imfo on the MC-62
|
|
|
|
Post by indy50 on Feb 23, 2008 14:45:48 GMT -5
Rusty, when you get to Roketa.com click on mopeds then scroll down to the very bottom of the page. The MC62 is there then click the oval shaped thing that says parts and info. you should be able to print the diagram from there:)
|
|
|
|
Post by rusty on Feb 23, 2008 15:59:53 GMT -5
i DID THAT AND NO INFOMATION ON IT YET, OR I'M DOING IT WRONG
|
|
|
|
Post by earlwb on Feb 23, 2008 20:26:37 GMT -5
Since some of the regular 250's come with a circuit diagram anyway. I'd wait and see what you get.
Yes you are correct, as they isn't anything on their website for parts lists or a circuit diagram.
Before you order LED lights, you need to determine what will fit or not fit first. So I would wait and get the scooter first to see what you got.
Anyway the MC62 looks like a MC54-250B, except they changed the front and rear body panels to give it a different look more in line with the current Japanese Scooter they cloned it after. I didn't go take a look to see which scooter they cloned yhet. So a MC54-250B circuit diagram is is very likely the same thing. The MC62 still uses the same Linhai engine that is in the MC54-250B. They tend to keep everything fairly generic, so it'll be very similar to the other 250cc range of scooters with the Linhai engine.
|
|
|
|
Post by indy50 on Feb 25, 2008 18:34:57 GMT -5
Sorry Rusty, I noticed that not all of the listed scoots on the site dont offer the diagram. I just figured since thats how I got my diagrams I ASSumed that option was available for all of their products. MY BAD
|
|
|
|
Post by cndzdad on Aug 8, 2012 16:15:22 GMT -5
does anyone have a wiring schematic for a mc-54 250?
|
|
|
|
Post by macktheknife on Aug 8, 2012 19:47:58 GMT -5
does anyone have a wiring schematic for a mc-54 250? Sent you a PM |
|
|
|
Post by rxf610 on Aug 9, 2012 9:28:01 GMT -5
This has saved me a million headaches... Attachments:
|
|
|
|
Post by macktheknife on Aug 9, 2012 20:40:38 GMT -5
Problem with that diagram is it's for the Bali150 and he asked for the 250B diagram a whole different animal and the man that drew that also drew a diagram for the 250B.
|
|
|
|
Post by rxf610 on Aug 9, 2012 23:22:37 GMT -5
Problem with that diagram is it's for the Bali150 and he asked for the 250B diagram a whole different animal and the man that drew that also drew a diagram for the 250B. Really? I have a Bali 250 and it matches all my wire coloring and locations. I have ZERO knowledge of this bike as it is my first scooter I have ever worked on and it still isn't running. If I am reading you correctly, someone has taken a 150 wiring harness and put it on my bike. |
|
|
|
Post by wile on Aug 9, 2012 23:25:21 GMT -5
That is 150bali wireing diagram, you sure you have a 250 and not a 150? put up a picture of your scoot of the Left and right side.
Wile
|
|
|
|
Post by macktheknife on Aug 9, 2012 23:34:53 GMT -5
Problem with that diagram is it's for the Bali150 and he asked for the 250B diagram a whole different animal and the man that drew that also drew a diagram for the 250B. Really? I have a Bali 250 and it matches all my wire coloring and locations. I have ZERO knowledge of this bike as it is my first scooter I have ever worked on and it still isn't running. If I am reading you correctly, someone has taken a 150 wiring harness and put it on my bike. Matches up to a point. Look at that diagram and see if you see wiring for the temp gauge, cooling fan, radiator thermoswitch, temp sensor. Plus the Bali 250 has a 3 phase stator and a 6 pin regulator. Now how much do you think it matches? As I said the diagram is for the Bali 150 with the GY-6 engine, the 250 has the 244cc vertical CfMoto clone engine and is water cooled. Saved me a million headaches I have ZERO knowledge of this bike as it is my first scooter I have ever worked on and it still isn't runningThese two statements just don't seem to go together? |
|
|
|
Post by wile on Aug 9, 2012 23:38:21 GMT -5
Yep I was just going to mention that the diagram does not show the extra items the 250s have. And they all have a TEMP gauge for the cooling because that is critical.
Wile
|
|
|
|
Post by wile on Aug 9, 2012 23:51:01 GMT -5
RxF610,
Well if it isn't running open a thread with the problem and we will get it running for you provided you be our eyes and hands(no charge you provide the labor).
Wile
|
|
|
|
Post by rxf610 on Aug 10, 2012 7:58:04 GMT -5
Really? I have a Bali 250 and it matches all my wire coloring and locations. I have ZERO knowledge of this bike as it is my first scooter I have ever worked on and it still isn't running. If I am reading you correctly, someone has taken a 150 wiring harness and put it on my bike. Matches up to a point. Look at that diagram and see if you see wiring for the temp gauge, cooling fan, radiator thermoswitch, temp sensor. Plus the Bali 250 has a 3 phase stator and a 6 pin regulator. Now how much do you think it matches? As I said the diagram is for the Bali 150 with the GY-6 engine, the 250 has the 244cc vertical CfMoto clone engine and is water cooled. Saved me a million headaches I have ZERO knowledge of this bike as it is my first scooter I have ever worked on and it still isn't runningThese two statements just don't seem to go together? I guess I should have said "matched as far as I got", but I would bet my life savings you are right... Never really got to the engine cooling side of the situation (temp gauge, fan, radiator, etc.) because like I said, it doesn't get too hot not sparking and all... ;D I am very mechanically handy, a "million" is a SLIGHT exaggeration and I meant I knew nothing as I bought it from someone who could have used a wiring harness from a 94 dodge neon for all I know. It is definitely a 250. It is the vertical helix clone, 172mm stamped on the engine. Sorry for the wrong diagram, but honestly, it is very helpful versus nothing at all. |
|
|
|
Post by rxf610 on Aug 10, 2012 8:00:18 GMT -5
RxF610, Well if it isn't running open a thread with the problem and we will get it running for you provided you be our eyes and hands(no charge you provide the labor). Wile Got one: scootdawg.proboards.com/index.cgi?board=200cc&action=display&thread=53086Good news is that my CDI's are out for delivery today (I say CDI's because I bought several because the bike came with 2, both which were clearly bad upon some frankenstein surgery pic in my thread), and I am crossing my fingers she fires right up. A sneaking feeling tells me she will purr like a kitten. |
|
|
|
Post by wile on Aug 10, 2012 21:15:40 GMT -5
Great, purring is good,
Good luck
Wile
|
|
|
|
Post by macktheknife on Aug 10, 2012 23:18:44 GMT -5
because the bike came with 2,Please explain why the scooter would come with two? 
|
|
|
|
Post by rxf610 on Aug 11, 2012 1:06:02 GMT -5
because the bike came with 2,Please explain why the scooter would come with two? Because there was a spare in the trunk. Both bad, cut open to expose an explosion of I would guess the capacitor. I'm going to fine tooth comb the wiring again since I wasnt using the correct diagram. Mad love to you all, so glad I found this forum. |
|
