|
|
Post by wildbill84 on Sept 10, 2012 1:11:11 GMT -5
Both of my mirrors broke when i removed my scooter from storage, I was adjusting them and both mirrors broke off the metal rod that supports them. The culprit appeared to be cheap plastic that became brittle over time. I am ordering another set from Ebay and need to know what millimeter size the threads are. 8, 9 , or 10? Thanks The scooter is a 2008 Vog 260
|
|
|
|
Post by prodigit on Sept 11, 2012 22:39:56 GMT -5
I thought they where standard. Got no cycle store nearby where you can compare? Worst case scenario, you'd have to measure the outside, and inside thread with a tool like this:  They have em in plastic in the dollar store too (for one dollar); good enough for your purpose and more! |
|
|
|
Post by WarrenS on Sept 12, 2012 8:15:13 GMT -5
They are probably 10mm. See if they are the same size as your Nighthawk which would be 10mm.
|
|
