|
|
Post by NKY.S.C. on Jul 23, 2012 10:09:29 GMT -5
I want to add a Temp gauge to my 250cc Roketa. I want to keep the original in-dash and add a second real gauge. I have seen where the factory sensor location is used and a splitter is used to accommodation the two sensors. Can anyone tell me where to buy this part or how to make one?
|
|
|
|
Post by OverReved on Jul 23, 2012 11:43:21 GMT -5
What will your Temp gauge be reading the Temperature of? Will it be analogue or digital or just a light bulb?
|
|
|
|
Post by derbi on Jul 23, 2012 11:47:24 GMT -5
|
|
|
|
Post by nulldevice on Jul 23, 2012 11:52:20 GMT -5
|
|
|
|
Post by NKY.S.C. on Jul 23, 2012 12:33:33 GMT -5
I got a simple 2" gauge. I read some where that you use the temp sensor hole on the block and make a T- so you can have the dash and temp gauge working. And if you use the one in the radiator then you kill the auto on feature of the fan.
In retrospect I should have just bought the TTO product.
|
|
|
|
Post by nulldevice on Jul 23, 2012 21:39:49 GMT -5
NKY.S.K, The temperature gauge sensor has nothing to do with the cooling fan sensor. They are two different sensors. You leave both of them alone and epoxy the sensor, that comes with the gauges I posted links to, to the radiator tank.
|
|
|
|
Post by ltdhpp on Jul 24, 2012 0:48:52 GMT -5
You can get a replacement oil drain plug that has a threaded hole to accept a threaded sensor that is included with most electronic temperature gauges.
|
|
