Thanks for all the replies. I do want to take the canister out this Saturday. I'm mechanically inclined and don't think it will be a big deal to do, but my main concern is what hoses do I keep and reroute and what hoses come off completely/get plugged? Pics would be greatly appreciated but a step by step will be just as good. Thanks again.
Post by metricmetal on Aug 29, 2012 13:58:34 GMT -5
Well, taking the canister out was easy, but it took a while. The seat and just about every panel on the scoot had to come off. I'm not a patient person so on a scale of 1-10 with 1 being none or little and 10 being extremely, it was a 1 for difficulty and an 8 for patience.
I reset the code light and so far so good too. Thanks again for everyones input.
Have had my CF Moto Glory for almost 2 years. I still really love it but have had a couple of times of a "sputter" then losing power after doing 57-60mph for a while (close to wide open and with speedo reading of 73-75). Probably feul pump? Earlier we just suspected it was that I was hitting the RPM limiters. Checked jet issues too. Any ideas?
Also wanted to ask if anyone knows how to tighten the "cuff" of controls on the left side of the handlebars (with the signal/headlight/horn). My DH accidently lowered the garage door, hitting the mirror bracket. It bent it down along with loosening the part that the bracket is attached to. Do I just crank the nut down that's on top of it, under the mirror bracket? I have a windshield bracket attached on top of that nut as well.
Well, you can tell I'm still a newbie at this...the sputterings were due to the RPM limiters, nothing else. The garage door incident is going to be fixed by my wonderful dealer, Marty @ GoMoto in Minneapolis. The pin is likely broken and no tightening will fix that. Still LOVE my Glory !!
wereed: HOw can I start a thread?
Jun 1, 2013 10:55:49 GMT -5
wereed: or respond to a thread I started three years ago...
Jun 1, 2013 10:56:07 GMT -5
marklorenzi: I just bought one of the Fleetwoods. They look like a clone of the Honda XRM's they sell overseas. It is in transit now and I should get it this week. I will try to post my experience here. Call me the guinea pig hahaha.
Jun 2, 2013 20:29:11 GMT -5
flyangler: wereed, this forum is read only the new forum is on the banner above. Dan
Jun 5, 2013 7:35:29 GMT -5
silkyg1973: can someone please tell me how to post
Jun 10, 2013 12:08:46 GMT -5