tbell
New Puppy Dawg
Posts: 2
|
Post by tbell on May 25, 2008 20:37:03 GMT -5
i have a tank tour 150cc i need to change the gear oil, i am not sure which screws is for draining and filling can some assit me with this. do i have to take the crank case off to fill or drain,
|
|
|
Post by ty on May 25, 2008 21:07:53 GMT -5
hey tbell - welcome - you might get more response from this if posted in the 125 and up section. that being said, usually the higher of the two is for filling and the lower for drain check this: www.scootdawg.com/page6 scroll to the bottom of the page for the pic. don't think it's the exact same bike, but i can't imagine it being that different either try this too: www.youtube.com/watch?v=q2fSVNYZsSc - it's a flyscoot video on changing engine oil and the gear oil (gear begins at around 5 minutes)
|
|
tbell
New Puppy Dawg
Posts: 2
|
Post by tbell on May 25, 2008 21:36:45 GMT -5
thanks ty for the info and you tube video site
|
|
|
Post by ty on May 25, 2008 21:52:17 GMT -5
no problem - hope they help
|
|