|
|
Post by nananono on Sept 8, 2007 10:37:56 GMT -5
What are the blank looking keys for on remote? Thanks Vern
|
|
jimb
Junior Dawg
Posts: 7
|
Post by jimb on Sept 8, 2007 21:51:50 GMT -5
 Not sure I have them on my MC54 remote also. They cannot be cut to fit my scooter, I checked. I guess they just look cool!!!  Does you regular key work OK? mine will not turn the scooter on but about half the time, the remote works great an all the time.
|
|
|
|
Post by nananono on Sept 9, 2007 10:27:03 GMT -5
My keys work ok a little stiff somtimes remote works good ithought it would work like car remote . when you hit brake it would shut down O-Well Vern
|
|
|
|
Post by 12string on Sept 9, 2007 11:35:52 GMT -5
I know that I have a 150 but, mine came precut and work fine on my Eurosport  Check and see if yours can be cut, but if not see if yours is like mine and see if you can cut the end off your good key and install it on your remote, There is a set screw that you loosen on mine to change keys so you can unfold the key and use it as intended. |
|
|
|
Post by monty57 on Sept 9, 2007 17:51:17 GMT -5
I had to remove the blank from the remote (be careful of the spring) and my local hardware strore was able to cut them to fit my Roadrunner 250 TLX.
|
|
Not sure I have them on my MC54 remote also. They cannot be cut to fit my scooter, I checked. I guess they just look cool!!! 
Does you regular key work OK? mine will not turn the scooter on but about half the time, the remote works great an all the time.
