Help,bali 250 electrical problem

[candyman]

Just received my bali 250.it has the cfmoto engine.My problem is that when i hook up the small accessory fused wire to the battery all my lights go on.It doesn't have a on/off switch for the lights.I believe they are only suppose to work when its running.I can disconnect the ignition switch,hi/low switch and the hazard switch and my head,tail and dash lights all come on.Does any one know what is suppose to control the lights?Would this have anything to do with a faulty rectifier/regulator assembly?Any help would be appreciated.

[e-mail]

[WarrenS]

Read this post.
scootdawg.proboards59.com/index.cgi?board=200cc&action=display&thread=1178818021

[candyman]

Warstein
Thanks for the link

[buckeyescoot]

Hey Candyman - Buckeyescoot here.

Did reversing the leads on the (what I have been told now is a Resister/Heatsink) diode change the lights always on situation for you? I hope so.

I am still trying to chase down a battery charging system issue on mine still. I can get to work and back then charge the battery for three hours. I hope replacing the rectifier will do the trick.

Joe (buckeyescoot)