|
|
Post by 90GTVert on Jun 10, 2007 10:32:59 GMT -5
Part 2 of the review of the RoadRunner Racer 250 is now available at www.oregonvintage.com/Racer250-2.pdf The next article will be available in a few weeks when more testing is completed. Stan |
|
|
|
Post by westcydr on Jun 10, 2007 11:27:44 GMT -5
Thanks!!
|
|
|
|
Post by Andi on Jun 10, 2007 19:26:39 GMT -5
Great follow up, much anticipated, thanks Stan.
Andi
|
|
|
|
Post by westcydr on Jun 11, 2007 21:04:54 GMT -5
hey, do you know where the coolant drain is on this scooter?
|
|
|
|
Post by 90GTVert on Jun 11, 2007 22:02:08 GMT -5
Look at the left side and find the coolant hose going to the pump and you will see a socket head bolt below it. That's the drain for the system. Stan hey, do you know where the coolant drain is on this scooter? |
|
|
|
Post by ccarnel on Jun 11, 2007 22:07:30 GMT -5
Already shot this to you in a PM but thought everyone else might like to know too. I also have the RR 250 Race comming this week. Have there been any fuel delivery problems yet with this scoot like so many here seem to have with either vaccum fuel valves, vaccum pumps or otherwise?
Does this scoot use vaccum pump, or gravity feed for fuel delivery
Would you reccomend replacing the vaccum pump (if indeed it does have this system) with an electric pump and if so with which one? I see that you reccomended one of the Mr. Gasket pumps for some of the 150cc scoots
|
|
|
|
Post by 90GTVert on Jun 11, 2007 22:45:01 GMT -5
No, this is a gravity system with a vacuum fuel shutoff. I have not done the high speed runs yet, so I can't say if delivery will be an issue. Once it's broken in (if the weather cooperates) I'll have abetter idea if I need to find a better valve or not. Fortunately, it is not a tank mounted type so replacement is easy. Stan Already shot this to you in a PM but thought everyone else might like to know too. I also have the RR 250 Race comming this week. Have there been any fuel delivery problems yet with this scoot like so many here seem to have with either vaccum fuel valves, vaccum pumps or otherwise? Does this scoot use vaccum pump, or gravity feed for fuel delivery Would you reccomend replacing the vaccum pump (if indeed it does have this system) with an electric pump and if so with which one? I see that you reccomended one of the Mr. Gasket pumps for some of the 150cc scoots |
|
|
|
Post by westcydr on Jun 12, 2007 0:38:22 GMT -5
I found the bolt, but I do not think I did a very good job changing out the fluids..
|
|
|
|
Post by lewtwo on Jun 12, 2007 18:18:28 GMT -5
Excellent idea with the Velcro for the mats!
|
|
|
|
Post by aristide1 on Jun 14, 2007 10:01:16 GMT -5
Part 2 of the review of the RoadRunner Racer 250 is now available at www.oregonvintage.com/Racer250-2.pdf The next article will be available in a few weeks when more testing is completed. Stan Very professional. Thanks. |
|
