|
|
Post by valkernaut on Jul 24, 2006 16:18:54 GMT -5
So far, every place I have searched has them discontinued. All of the parts fische's I have seen only show the one that does not have the hand protectors built into the fairing. I found one pic of an '85 on Ebay that is offered from Ontario that has same fairing. Any help tracking one down will be greatly appreciated.
TIA,
Jim
|
|
|
|
Post by oldscooterguy on Jul 24, 2006 21:42:24 GMT -5
That's the original Honda fairing. I was unable to find one so I bought a slipstream and it works great. I prefer the Slipstreamer since it helps protect my hands.
|
|
|
|
Post by valkernaut on Jul 25, 2006 12:45:16 GMT -5
Does the Slipstreamer fit OVER whats left of the original - or replace it? Looks as tho the JCW one attaches to the mirror supports....
|
|
|
|
Post by oldscooterguy on Jul 25, 2006 13:16:07 GMT -5
You remove the Honda emblem on the front of the handlebar shield to reveal the attachment bolts for the colored handlebar plastic body piece. You take out the two bolts and attach the slipstreamer there at the front and also at the mirror attachment points. The directions kinda SUCK but I could help talk you thru it if you buy one.
The slipstreamer is far and away better than the original Honda windshield.
|
|
|
|
Post by oldscooterguy on Jul 25, 2006 13:17:00 GMT -5
I'll try to take some pics this afternoon and upload them tonight, if the wife stops yapping at me!  |
|
