|
Post by lewtwo on Jun 4, 2006 18:53:21 GMT -5
The longbo does not have enough room under the seat for a open face helmet. I got tired of having to walk around with it hanging off my arm like a purse. This may not be the best solution but it is easy, simple and cheap (I always like cheap).
Bent piece of metal 1/4-20 x 1/2 pan head screw 1/4-20 nut 1/4 flat waster
Admitted this is only attached to the plastic body. I tried to find a convient hard point but could find nothing that would lead to a simple solution ... so I settled for plastic.
|
|
|
Post by lewtwo on Jun 4, 2006 18:54:50 GMT -5
Note that it is well clear of the key lock.
|
|
|
Post by Admin on Jun 4, 2006 18:56:47 GMT -5
Nice!
|
|
|
Post by surfbum96818 on Jun 6, 2006 19:12:27 GMT -5
Wow I am amazed at how simular so many different brands of scooter are I have a SUN L adventure 150cc and the adventure sticker on the side is THE SAME STICKER as yours. Can you do me a favor ? on the left side of your scoot on the trans case if you look all the way to the front of it where the metal piece juts under the floor board is there some type of filter there I thought mine used to have a filter there and now it doesn't I could just be nuts ( most likely ) now when I feel it there is just an opening like it is venting the variator or something. Tell me if I just made no sense at all!!!!
|
|
|
Post by Admin on Jun 7, 2006 8:36:52 GMT -5
There is no filter there.
|
|
|
Post by perrym on Jun 7, 2006 11:36:39 GMT -5
Longbo is the manufacturer for SunL, that's why they have the same stickers. Look at the VIN plate to see who the manufacturer is and also the MCO states it.
|
|
|
Post by surfbum96818 on Jun 7, 2006 14:59:33 GMT -5
Thanks to you both !!! I don't know wht I thought there used to be a filter there !?!?!?
|
|