|
|
Post by ykdavid on Feb 22, 2013 16:02:27 GMT -5
MC-13-250 overheats once I get over 45mph.
|
|
|
|
Post by skuttadawg on Feb 22, 2013 16:04:31 GMT -5
Check the oil and do a plugchop to see if its too lean
|
|
|
|
Post by 50cc on Feb 22, 2013 16:06:51 GMT -5
Roller weights too light?
|
|
|
|
Post by scootnwinn on Feb 22, 2013 16:36:56 GMT -5
Blown head gasket?? Is it water cooled
|
|
|
|
Post by skuttadawg on Feb 22, 2013 16:38:20 GMT -5
If LC check the coolant level and may need to burp it
|
|
|
|
Post by ykdavid on Feb 22, 2013 17:21:08 GMT -5
I put all new coolant yesterday. not sure how to burp it? but I did run it and fill it up with coolant a few times. I can ride around fine at 35mph but when I get faster the temps just keep climbing and won't stop I know it's overheating because it spews coolant from the cap.
How do I burp It?
|
|
|
|
Post by skuttadawg on Feb 22, 2013 17:21:54 GMT -5
Have the cap off start it up and squeeze the hose
|
|
|
|
Post by ykdavid on Feb 22, 2013 17:50:22 GMT -5
witch hose?
|
|
|
|
Post by spandi on Feb 22, 2013 17:57:39 GMT -5
|
|
|
|
Post by ykdavid on Feb 23, 2013 13:08:09 GMT -5
I think that^^^ worked. It's running a lot cooler now but I'm waiting for a nice day to check at high speed. It's cold and wet outside  |
|
|
|
Post by ykdavid on Feb 27, 2013 12:01:48 GMT -5
nope the temps get mid way up and then the scoot pushes out coolant then runs hot?
|
|
