|
Post by ward on Feb 7, 2013 15:33:52 GMT -5
I want to upgrade my gauge cluster to have a tach, but I'm not sure where the tach input comes from. Does it just hook up to the CDI trigger wire from the stator, or do I need a different CDI with a tach output? Also, I am assuming the fuel sender will work with the new gauge, but does anyone know for sure? Lastly, the cluster I want to install has the speedo measured in Kilometers as the outside set of numbers, so I assume the odometer is also in km. I am going to try to swap the odometer or even entire speedometer assembly from my exising gauge cluster, has anyone tried this? This is the gauge cluster I currently have: And I want to install one like this:
|
|
|
Post by Scooter Elements on Feb 7, 2013 15:47:59 GMT -5
That is what i have seen most people do is hook up the RPM cable to the CDI. There are a few different ones out there. I actually found this one at another scooter store today. It was missing the clear lens cover and they gave it to me. 100% digital. Going into my other scooter. i have been looking for it for a long time. The other two are others that i sell roughly about $45.00-$50.00 shipped. and yes the fuel sender will work on all of them. Its a 3 wire plug found on almost all of them.
|
|
|
Post by ward on Feb 7, 2013 16:51:40 GMT -5
That one on the left in your 2nd picture, with the black and white faces, is the speedo in MPH, and do you sell it in your store? I'd be interested in buying it from you if so. I haven't been able to find one I like that has the tach, and the speedo in MPH. I have found the blue faced one that you also pictured, but nothing on my scoot is blue, and I don't like the font as much.
|
|
|
Post by Scooter Elements on Feb 8, 2013 9:09:27 GMT -5
Hi, Yes it has both MPH and KPH. I do sell them. to better protect the clips i would have to ship it in a Medium Flat rate box. I just added it to the website with 5 extra pictures. Here you go. Also i have another one in stock. i have not seen it yet. i am waiting for my partner to take the pictures so i can put it on the website. He told me its gray. www.scooterelements.ecrater.com/p/17151334/black-racing-speedometer-cluster
|
|
|
Post by ward on Feb 8, 2013 11:08:30 GMT -5
Dang, it's almost what I was looking for. It still has Km/h as the primary measurement on the speedo, which means the odometer will also be in Km. The one I already bought on ebay is like this as well. I was hoping for one that has MPH as the primary measurement on the speedo.
|
|
|
Post by Scooter Elements on Feb 8, 2013 11:20:47 GMT -5
Dang, it's almost what I was looking for. It still has Km/h as the primary measurement on the speedo, which means the odometer will also be in Km. The one I already bought on ebay is like this as well. I was hoping for one that has MPH as the primary measurement on the speedo. yea its hard to find one with MPH as primary since most of the world uses KPH and the USA i think is the only country that uses MPH. Here in Puerto Rico we use MPH but for distance everything is in Kilometers
|
|