|
|
Post by bloodymomo on Feb 6, 2013 2:47:41 GMT -5
Ok I have a tao tao VIP. 50cc. Now hypoththetically if tit bought a gy6 159cc engine and the motor mount on monstergy6 would it miunt up to my frame or would I have to weld some brackets? Which is doable. I wish I woulda thought about this before I soent all my taxes on upgrades for my 50. But would that work? Then just buy the tire rim n hub? Or am I missing something? Thanks guys. If it would work I know what I'm saving for this summer
|
|
|
|
Post by MEAN_MOTOFINO on Feb 6, 2013 3:12:57 GMT -5
HOLY CRAP your sig is HUGE!!
The Monster GY6 Mount should just bolt in...specially for the cost of it.
|
|
|
|
Post by scootnwinn on Feb 6, 2013 16:28:29 GMT -5
Notice the image was reduced by 61%
|
|
|
|
Post by inuyasha on Feb 6, 2013 17:42:28 GMT -5
HOLY CRAP your sig is HUGE!! The Monster GY6 Mount should just bolt in...specially for the cost of it. Hi I agree with your entire statement OP you may want to resize your photo to fit in a little better. it took quite a long time to load Take care and ride safely dear friend Yours Hank |
|
|
|
Post by bloodymomo on Feb 7, 2013 0:26:41 GMT -5
I tried to resize it yesterday .. dang thing freezes my phone every time  |
|
|
|
Post by millsc on Feb 7, 2013 1:03:32 GMT -5
don't put a strecth kit on a tao put it on a ruckus its known to work with the ruckus and looks great, for the price of the kit you could buy nearly four tao's.
|
|
|
|
Post by bloodymomo on Feb 7, 2013 2:55:55 GMT -5
I wouldn't buy the whole kit.. I would just buy a 150cc engine the motor mount hub n wheel. I don't need all the performance shock n others as I already have good enough stuff
|
|
|
|
Post by bloodymomo on Feb 7, 2013 3:05:14 GMT -5
don't put a strecth kit on a tao put it on a ruckus its known to work with the ruckus and looks great, for the price of the kit you could buy nearly four tao's. But millsc have u seen this tao? (Granted it has the skinny tire instead of fat but still it shows what the tao stretched wiuld look like) I think it looks bad ass Attachments:
|
|
|
|
Post by millsc on Feb 7, 2013 10:06:25 GMT -5
maybe i was wrong that tao looks great
|
|
|
|
Post by Enviromoto on Feb 7, 2013 10:34:33 GMT -5
It's pretty easy to do if you have fab skills.
You'll need a motor, hub, and wheel & tire. Then simply offset the motor in the frame, weld up some mounts, and wire it up. Be careful with the length of the stretch though because then cables need to be longer and that can be a real pain to sort out.
|
|
|
|
Post by skuttadawg on Feb 7, 2013 13:21:45 GMT -5
Would be easier to buy a 150 scooter . Those huge tires will take away the engine ability to work as good
|
|
