|
Post by cyberpunk71 on Feb 1, 2013 18:14:38 GMT -5
I need a picture of the wires going into the CDI. Mine got pulled out of the plug so I need to see what color goes where.
|
|
|
Post by cyberpunk71 on Feb 1, 2013 18:15:19 GMT -5
Sorry this is is a 50cc roketa scooter gy6
|
|
|
Post by yosemite on Feb 1, 2013 18:25:37 GMT -5
Sam
|
|
|
Post by rae4180 on Feb 1, 2013 18:50:37 GMT -5
the frist green wire dont need to be put in if ya leave it out you well get more mph.............
|
|
|
Post by yosemite on Feb 1, 2013 19:03:38 GMT -5
What he means is IT MIGHT BE THE WIRE that restricts the RPMS. You may get some more top end but that also depends on how your CVT is setup. It may just rev higher but no more top end. Lefty
|
|
|
Post by cyberpunk71 on Feb 2, 2013 18:59:08 GMT -5
Thanks for the help.
|
|
|
Post by prodigit on Feb 3, 2013 20:04:39 GMT -5
On my Tao ATM50, it'd be one of the inside wires, like the yellow or green one under the yellow one, that restricts the speed. The Tao does not have a plug there.
|
|
|
Post by skuttadawg on Feb 4, 2013 1:50:13 GMT -5
The clips should be self explanatory as it only fits one way
|
|