|
Post by ryan52 on Jan 15, 2013 23:49:38 GMT -5
just wondering if anyone has a 100cc minarelli? if so whats your setup carb exhaust bore stroke etc...
|
|
|
Post by skuttadawg on Jan 15, 2013 23:52:01 GMT -5
|
|
|
Post by ryan52 on Jan 16, 2013 5:18:17 GMT -5
i know ive read that thread alot i was wondering if any one else has some builds they wanna talk about. and their top seeds etc...do you have one?
|
|
|
Post by teddy554 on Jan 16, 2013 7:36:38 GMT -5
i have the stock 90 cc motor waiting on new carb and jet to start tuning but besides that i have 4.5 gram weights and a next r pipe
|
|
|
Post by ryan52 on Jan 16, 2013 7:59:59 GMT -5
what carb and jet you gonn run and filter?
|
|
|
Post by teddy554 on Jan 16, 2013 8:17:23 GMT -5
|
|
|
Post by richardthescooter1 on Jan 16, 2013 12:14:06 GMT -5
Sound good, wear your ear plugs lol.
|
|
|
Post by teddy554 on Jan 16, 2013 15:00:55 GMT -5
its not as loud now i had to get a different gasket
|
|
|
Post by ryan52 on Jan 16, 2013 18:10:32 GMT -5
oh im running a mikuni 19mm with 105mj cone filter and tuned pipe with needle set second to richest..have you factored in the cold weather and do you pre mix?
|
|
|
Post by teddy554 on Jan 16, 2013 18:16:41 GMT -5
no i dont premix but i did add a little extra oil to the tank about a once to help with the first start and some extra lube for the first tank of gas, forgot to mention my needle is also set to the second richest position i also feel i can go up on the main jet but just decide to wait on my new carb and other stuff before i do any more tuning
|
|
|
Post by ryan52 on Jan 16, 2013 20:29:45 GMT -5
yeah are you having problems with yours and have you been running it if so whats your top speed and your weight?
|
|
|
Post by teddy554 on Jan 17, 2013 0:12:20 GMT -5
yeah it run kind of crappy, hoping cause it was out of tune, the only riding i have done on it is a plug chop runs a couple of time about 50 yards but its been kind of weak and likes to shut off but after i get new carb and everything in sycn i am removing head gasket and might shave the head to get some more compression i know alot of these motors suffer from low compression from some other threads
|
|
|
Post by ryan52 on Jan 17, 2013 0:33:34 GMT -5
huh..i have crazy compression i can stand on the kick start maybe half sec to a sec before it starts going down. i did have a comresion test done while back and i think it was around 175 or higher under 200 i believe. but i tuned everything on my engine so far. have you checked out the gears on the 100's they are some whoppers. it deffinatley has gears for speed!!
|
|
|
Post by teddy554 on Jan 17, 2013 17:05:18 GMT -5
no have looked at the gears yet
|
|
|
Post by ryan52 on Jan 18, 2013 3:02:38 GMT -5
well i finally got mine up and gooing nd cant get it to go past 40-45..idk why? ive tried it all it should be hitting 55 easliy
|
|