|
Post by manaboi on Jan 14, 2013 1:19:08 GMT -5
I have a 2 stroke geely that dont have any spark, I changed the coil and stator with another one and still no spark? Any help will be much appreciated!
|
|
|
Post by skuttadawg on Jan 14, 2013 1:27:17 GMT -5
Check the CDI and look for loose or unattached ground wires . You did have the plug in tight in the boot and grounded to the engine or frame to test for spark ?
|
|
|
Post by manaboi on Jan 14, 2013 1:45:23 GMT -5
All ground wires were tight and plug in cap snug and grounded to cylinder.
|
|
|
Post by manaboi on Jan 14, 2013 1:46:37 GMT -5
How would you test the cdi to find out if its bad?
|
|
|
Post by skuttadawg on Jan 14, 2013 1:49:49 GMT -5
Replace with another is easy if its a 5 pin . Unsure on what the power outputs should be
|
|
|
Post by manaboi on Jan 14, 2013 2:03:48 GMT -5
Dont have another one to try, but will do that thanks!
|
|
|
Post by kevinx on Feb 2, 2013 10:32:35 GMT -5
Problem with Chinese scooters are their is really no type of diagnosis. You just kinda swap parts till it fires over. Always good to have an extra CDI in case you break down on the road. Good Luck
|
|
|
Post by teddy554 on Feb 2, 2013 11:04:51 GMT -5
|
|