kodani
New Puppy Dawg
Posts: 1
|
Post by kodani on Jan 10, 2013 9:39:15 GMT -5
The drive belt broke yesterday on my 150cc Lance Duke Touring scoot, and I can't track down the belt size anywhere (haven't had time to take it apart and look). Anyone here happen to know which belt I need?
|
|
|
Post by snugglebunny on Jan 10, 2013 9:41:08 GMT -5
maybe someone can tell you the size but i think the best way to get a good fit is just open your CVT and find the size printed on your belt
sorry if this doesnt help much
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 10, 2013 10:21:11 GMT -5
You're going to have to pull the cover anyhow to replace it, I would pull it because you're taking a chance ordering any which one we tell you if it's the wrong one you're out $20+ and you have a useless belt because it's your own fault so no returns but if you are a very desperate individual maybe you can try 842-20-30 which is a standard replacement belt for long case 125/150cc 4-strokes. If you have a 12" or larger wheel in the rear it's likely a long case. Vento Phantom R4i, R3, Jonway, NST, Tank, JMstar, Roketa, Sunl, Peace, and so many others.
That's not to say it's the belt yours takes.
But when you find yours... 1. Get the Gates Premium Kevlar type, they last a lot longer and are a far better investment. 2. Get two, it helps a little with shipping and stick one in the glove compartment.
|
|
|
Post by tortoise on Jan 10, 2013 11:37:21 GMT -5
|
|
|
Post by tvnacman on Jan 10, 2013 12:45:11 GMT -5
Its 842-20-30 I have the gates in stock.
John
|
|