|
|
Post by doublert on Jan 6, 2013 18:18:48 GMT -5
For the past few weeks I noticed my front wheel making noise, just a little clicking and squeeking, does something need greasing?
Also, why would it jerk hard during take off, at low speeds, but after a mile or so it accelerates smoothly, kinda like something with the cvt needs warming up? The scooter and mods are in the sig below.
|
|
|
|
Post by doublert on Jan 6, 2013 19:31:37 GMT -5
It could just be the cold weather..... Like you said just needs to warm up a bit. (Just a Guess) Try putting it on the center stand and rotate the wheel. Can you see anything rubbing or pin point the squeak??? Yea, I tried turning the wheel on the center stand, cant find exactly what it is, sounds like its in the wheel when it spins. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 7, 2013 2:50:45 GMT -5
Sometimes a little dust in the brake system causes the pads to squeak against the discs, unfortunately the sound is awful similar to dry bearings, the clicking concerns me as well, squeaking alone wouldn't be such a big deal but the clicking could be the sound of the balls inside one or the other bearing, I'd certainly monitor it just to be sure it's not the bearings...
|
|
|
|
Post by doublert on Jan 12, 2013 21:05:17 GMT -5
Sometimes a little dust in the brake system causes the pads to squeak against the discs, unfortunately the sound is awful similar to dry bearings, the clicking concerns me as well, squeaking alone wouldn't be such a big deal but the clicking could be the sound of the balls inside one or the other bearing, I'd certainly monitor it just to be sure it's not the bearings... It was the speedometer cable, it was broke inside. Thanks, everyone |
|
