|
Post by scooter99 on Dec 30, 2012 20:57:42 GMT -5
Hello everyone I have here a 2008 lancer Venice 150cc scooter. I have a problem with the wiring as you can see in the picture. That wire goes directly to the magneto. Every time i try to start it it glows hot red and it even melted the plastic cover as you can see. Can someone help me with this problem. Or can you send me a wiring diagram to see where this wire leads to so i can try to figure out the problem. Thank you in advance. Attachments:
|
|
|
Post by tvnacman on Dec 30, 2012 21:32:04 GMT -5
your missing your engine ground .
John
|
|
|
Post by scooter99 on Dec 30, 2012 21:38:07 GMT -5
So how do I fix it. Sorry I'm a bit new the the scooter world.
|
|
|
Post by tvnacman on Dec 30, 2012 21:48:38 GMT -5
start at the - battery and follow the black wire it should mount to the frame and at that point it shouls meet another black wire that goes to the engine .remove the bolt holding the wire and clean it up to bare metal make sure it tightens up good . and do the same where it bolts to the engine .
John
|
|
|
Post by scooter99 on Dec 30, 2012 21:57:00 GMT -5
I just followed the wire from the battery and it dose bot to the frame. But at the same spot that it bolts on to the frame there is a green wire not black. Should I follow the green wire to make sure it goes to the engine or should there be a black wire
|
|
|
Post by tvnacman on Dec 30, 2012 22:09:45 GMT -5
follow it , is it a heavy wire or a skinny one ? it should be heavy .
John
|
|
|
Post by scooter99 on Dec 30, 2012 22:10:59 GMT -5
I also found these two wires there and they weren't connected to anything. Its green and red one. I followed them and the green one leads to the positive side of the battery and the green on to the negative side to the battery. I don't know were these should go. Can someone tell me. Attachments:
|
|
|
Post by scooter99 on Dec 30, 2012 22:12:44 GMT -5
And i followed the green wire from the battery and it leads directly to the one that's burnt out.
|
|
|
Post by tvnacman on Dec 30, 2012 22:17:22 GMT -5
when did this problem start to happen , when you took the fan cover off ?
John
|
|
|
Post by macktheknife on Dec 30, 2012 22:22:11 GMT -5
John you know where to send him for help and a diagram.
|
|
|
Post by scooter99 on Dec 30, 2012 22:24:15 GMT -5
Well I painted the body on my scooter because the color faded away and yes i took a the fan cover off but i didn't take any wires off. Or at least I don't think so. And I tried to start it up again And this happen. I still haven't Put the body back on and I don't want to put it back until its running again. So yea it started after i pulled off the body. Do you think i might off pulled those wires off by accident.
|
|
|
Post by tvnacman on Dec 30, 2012 22:29:54 GMT -5
your missing a wire that attaches to the engine . if you don't see add one . I sent you a pm .
John
|
|
|
Post by scooter99 on Dec 30, 2012 22:45:21 GMT -5
Hey i received your pm But it was blank and i just took a look and tried to find if there was wires coming from the engine and there seems to be none but i found this on the main harness leading up to the front of the bike. its a green and black wire. I don't know if this is related to my problem but here is a picture. And also if I put in a new wire to the engine were wold it be connected to. Attachments:
|
|
|
Post by tvnacman on Dec 30, 2012 22:50:29 GMT -5
is it near your kick stand ?
John
|
|
|
Post by scooter99 on Dec 30, 2012 22:52:23 GMT -5
its directly on the other side of the frame
|
|
|
Post by scooter99 on Dec 30, 2012 22:55:11 GMT -5
the kick stand is on the left side and this loose wire is on the right side of the frame
|
|
|
Post by tvnacman on Dec 30, 2012 22:56:39 GMT -5
looks like it is for s center stand cut off switch . Not all scooters have them . shoot me an email tvnacman@aol.com
John
|
|
|
Post by medman1952 on Dec 30, 2012 23:29:39 GMT -5
|
|
|
Post by tvnacman on Dec 31, 2012 6:38:26 GMT -5
nice find Doug enjoy your day today .
John
|
|
|
Post by medman1952 on Jan 6, 2013 0:11:48 GMT -5
|
|
|
Post by tvnacman on Jan 6, 2013 10:00:35 GMT -5
Nice find Doug I stickeyed it . A dc cdi is on its way and he should get it tomorrow . So lets see what happens . John
|
|
|
Post by medman1952 on Jan 6, 2013 22:54:50 GMT -5
|
|
|
Post by EPAhater on Jan 7, 2013 14:18:06 GMT -5
Here's a better one drawn by the same man that drew some of the others:
|
|