|
|
Post by wangchicken on Dec 23, 2012 11:48:21 GMT -5
  Started life out as a FUTURE CHAMPION VIP 50cc |
|
|
|
Post by snugglebunny on Dec 23, 2012 12:08:32 GMT -5
beautiful color
are you going to have the plastics the same color
or do something different?
|
|
|
|
Post by wangchicken on Dec 23, 2012 14:51:56 GMT -5
no plastics at all Thats pretty much it ill post some more pics its been in my storage shed for a few months now need to finish some minor/major things
|
|
|
|
Post by wangchicken on Dec 23, 2012 18:10:24 GMT -5
|
|
|
|
Post by wangchicken on Dec 23, 2012 18:49:55 GMT -5
the motor is 190CC Big block Fuel injected coil on plug built with care  |
|
|
|
Post by lovemy2strokes on Dec 23, 2012 19:38:59 GMT -5
Howd you get it to 190cc out of curiosity as Im building a stroker gy6.
Thats a neat ride also!
|
|
|
|
Post by wangchicken on Dec 23, 2012 20:13:04 GMT -5
stroker crank
|
|
|
|
Post by wangchicken on Dec 23, 2012 20:18:10 GMT -5
180c with plus 2 crank
|
|
|
|
Post by lovemy2strokes on Dec 23, 2012 21:21:13 GMT -5
Ive been thinking about the 232cc, +8mm crank and a 67mm bore. Ill either go with 216 or 232cc not sure which yet. Ive seen people using the +2 crank with out any problem as far as shimming the base of the cylinder. Did you have to do any shimming?
Do you have a seat for that bad boy?
|
|
|
|
Post by wangchicken on Dec 23, 2012 22:57:38 GMT -5
the seat pan still has to go to upholstery , its a real busy seat pan holds my ECU , regulator , relays, Horn ,CDI ,Ignition box ,etc I didnt want to get it covered till i was sure i was done With Electrical Fiasco should be getting coverd in the next days or weeks, seat should look cafe-esqe with a bump/hump on the rear .
|
|
|
|
Post by wangchicken on Dec 23, 2012 22:59:50 GMT -5
as for motor no shims i didnt want to get too crazy crazy on the crank, I do have plan For 4$ valve head
|
|
|
|
Post by dude on Dec 24, 2012 0:05:43 GMT -5
|
|
|
|
Post by wangchicken on Dec 24, 2012 1:17:27 GMT -5
Dont need a crank BUt yeah thats a good deal
|
|
|
|
Post by lovemy2strokes on Dec 24, 2012 9:58:39 GMT -5
Thats a cheap stroker crank, Im using Taida for mine. If I had an extra gy6 around Id buy one just because its so cheap.
|
|
|
|
Post by wangchicken on Dec 24, 2012 10:03:07 GMT -5
I like the drink sunkist the color is well here is a closer pic ,  no cluster for speed Im just goin to use my Phone , i havent seen a cluster that i liked, the vapor is ok though just not for this build what other options are there for clusters? |
|
|
|
Post by lovemy2strokes on Dec 24, 2012 10:22:04 GMT -5
Koso is a good one and very cool looking but 200$+, stage 6 is expensive but awesome around 180-300, and trailtech vapor 140-180$ is the cheapest and does all of what the others do and more. It has a temp gauge that works with either head or water temp sensors. The other 2 do not for anywhere near same price.
|
|
|
|
Post by boamedt on Dec 24, 2012 12:15:54 GMT -5
Any details on that mono shock?
|
|
|
|
Post by lovemy2strokes on Dec 24, 2012 12:56:45 GMT -5
I didnt even notice that, sweet addition!
|
|
|
|
Post by wangchicken on Dec 26, 2012 16:42:10 GMT -5
the mono shock bracket's are hand made , I'll post some pics of it ,it took a while to figure out its conture fit to hug the top of the motor from the right outside engine bolt where it mounts to around the starter housing ,using over sized and gusseted metal i think it was 3/8ths thick . no flex and my safety were my goal
|
|
|
|
Post by wangchicken on Jan 5, 2013 5:43:35 GMT -5
Progess report ,Made new Foot brake lever Lost the other one i made, Got another gas tank cut to fit in floor,Mounted brake switch Behind my tag plate,
|
|
|
|
Post by wangchicken on Jan 5, 2013 5:48:13 GMT -5
awaitin exhaust its at Ceramic shop getting coated, custom alum intake gettin welded and install more new allen hardware almost all my bolts have been changed out so far Pics comin later
|
|
|
|
Post by atelhaddad on Jan 5, 2013 9:36:39 GMT -5
Very neat build man!
|
|
|
|
Post by scootercapecod on Jan 5, 2013 16:05:10 GMT -5
This is one of the cool build threads I've read so far like project green meanie and a few others. it's awesome to see the work you guys create and then it inspires me to want to do some more work on mine. Anyway, too cold to be working on stuff right now BUT I'm still riding (almost daily) so long as the white stuff stays away
|
|
|
|
Post by wangchicken on Jan 5, 2013 20:06:54 GMT -5
Gas tank Cut to fit ,It tucks Under the floor ,Very snug Fit Still need to Weld in a return line for Fuel injection  |
|
|
|
Post by wangchicken on Jan 5, 2013 20:08:13 GMT -5
Here is the foot brake arm  |
|
|
|
Post by wangchicken on Jan 5, 2013 20:11:54 GMT -5
Brake arm on need to get an allen bolt for the pivot  |
|
|
|
Post by wangchicken on Jan 5, 2013 20:15:31 GMT -5
 see the brake action  |
|
|
|
Post by wangchicken on Jan 7, 2013 18:48:59 GMT -5
progress report , caliper hardware found along with my missing new brake pads ,installed various hardware painted them semigloss black To match the Powder Coated Motor,Ran my fuel line inside the frame ,
|
|
|
|
Post by wangchicken on Jan 7, 2013 19:29:38 GMT -5
a flash back to what i started With  |
|
|
|
Post by wangchicken on Jan 10, 2013 1:30:09 GMT -5
Got my exhaust back From PerformanceKote i had it ceramic coated entirely in silver ,then had the body of it coated in black to raise the thermal barrier it protects up to 2000 degrees. My wheels are also Ceramic coated silver i love this stuff.  performancekote.com/i plan to wrap it in titanium exhaust wrap for the LOOK!lets see how that works out. |
|
