|
|
Post by newscooterer on Dec 21, 2012 16:59:12 GMT -5
While tightening my bottom ( drain screw ) it snapped half off... Half came out half sill in. What should I do!!!?
|
|
|
|
Post by rowdyc on Dec 21, 2012 17:07:04 GMT -5
|
|
|
|
Post by ryan52 on Dec 21, 2012 17:46:54 GMT -5
that happened to me i just took the belt cover off and clutch along with back tire and removed the gear housing and twisted it out.
|
|
|
|
Post by snugglebunny on Dec 21, 2012 18:23:54 GMT -5
another "backyard mechanic" trick
is to take a dremel tool and just cut a line in the broken
end and use a regular screwdriver to ease it out
if you can reach it
|
|
|
|
Post by newscooterer on Dec 21, 2012 19:33:34 GMT -5
How do I remove te flywheel? It's just keeps spinning. Sorry I'm no mechanic
|
|
|
|
Post by snugglebunny on Dec 21, 2012 19:51:49 GMT -5
um
i think 250 's
are different than my 150
so idk............................
theres good libraries in the home page
|
|
|
|
Post by carasdad on Dec 21, 2012 21:17:27 GMT -5
How do I remove te flywheel? It's just keeps spinning. Sorry I'm no mechanic Impact wrench for the nut....and a plumbers 'strap wrench' to hold it from turning. But to remove the flywheel you need a special puller..as a 2 or 3 jaw gear puller will warp and ruin it..here is a pic of the tool. Others here have had success with a gear puller...if ya try it be careful and do it at your own discretion.. Attachments:
|
|
