|
Post by cameracamel on Nov 28, 2012 18:24:38 GMT -5
Bought a MD150T-6 used. They stripped the threads TRYING to install the variator. Anyone with the thread size and pitch of the shaft and variator nut? Thanks, The new guy.
|
|
|
Post by Fox on Nov 28, 2012 18:50:42 GMT -5
Same threads as the clutch nut. Take the clutch nut to the hardware store and match it.
|
|
|
Post by cameracamel on Nov 28, 2012 20:09:35 GMT -5
I need to find the size die to buy to chase the threads on the shaft....
|
|
|
Post by Fox on Nov 28, 2012 20:13:03 GMT -5
I did some searching and it's a 12mm diameter x 1.5mm threads
|
|
|
Post by tjbizzo on Jan 27, 2013 10:00:19 GMT -5
I did some searching and it's a 12mm diameter x 1.5mm threads Not sure where you got that info but every 50cc and 150cc scooter I have seen has M12x1. 25 threads to hold the variator on.
|
|