|
|
Post by pedhead on Oct 29, 2012 11:15:56 GMT -5
I just got a 2007 Roketa Bali 250 and the rear wheel is severely damaged. It is a 10" disk brake wheel. If my calculations are correct 120/90-10 = 20.5 inches so I think a 130/70-12 or 130/60-13 would also fit. If anyone can verify either way if a disk brake wheel from a 150 will work it would be greatly appreciated.
|
|
|
|
Post by leo on Oct 29, 2012 20:51:21 GMT -5
you have 3 things to worry about:
1. rotor clearance.
2. spline fit.
3. if the wheels fits then you will need to go with a low profile tire.
i'm not sure whether you have the 244 or not but mine has a 13" wheel with a 130/60-13 tire.
both the wheel and tire must be rated for speeds of at least 80 MPH.
|
|
|
|
Post by pedhead on Oct 29, 2012 22:41:14 GMT -5
hmmm yes mine is a 244cc acording to some info I found in search they were designing a long case in 2007 but I have not onw to compare it to to clarify if it is longer or not. i do know i have about an inch of clearance past the tire to the crankcase. My question really comes down to the spline - is it the same as the gy6 spine?
|
|
|
|
Post by leo on Oct 29, 2012 23:03:28 GMT -5
- is it the same as the gy6 spine? i have no clue. |
|
