BMS 260 2008 take off problem

[max]

Hi guy's - I've got over 12 K on it and have done many parts replacements and lots of general maintenance. The Valves were adjusted about 1000 miles ago. When worm and it idles fine.
The scooter has been running great for quite a while.
Now suddenly while sitting at stop it may die or on take off during exceration. After it gets going it runs fine. Theres no miss but a cough off and on on take of.
Just like some input as to what to do now.
Thanks in advance
Max

[richardthescooter1]

I'd check your vacuum lines and intake clamps, or maybe check intake manfold, mine was choking and stalling out, discovered my problem

Attachments:

[prodigit]

spray oil on the vacuum lines, and see if it works again. If it does, then it's time to replace the lines.

Tell me, which issues did you have with the bike?

Other than a blocked front brake caliper, which I already dealt with, mine is going well at 1500 miles now. At 12k miles you're an excellent example to many who say their chinese bikes won't last.

[scootnwinn]

When the weather changes and it gets cooler you need to adjust your idle turn it up a bit...

[max]

Thanks guys
I put in a new goose neck and one of the clamps was loose didnt fing anything else. I adjusted the mixture and the idle and I checked the valve clearance it was right on.
Took it out for a 20 mile ride and seems to run fine again.

Once again thanks