jevid
New Puppy Dawg
Posts: 4
|
Post by jevid on Oct 8, 2012 12:34:45 GMT -5
Was working on my scooter over the weekend and noticed this loose wire (it's the yellow one). Not sure where it goes. It looks like it should connect to the nipple just to the right of where the green wire attaches, but I would have thought a tube of some kind would there. On the other hand, the yellow wire does have an odd connector on the end. Anybody have any thoughts? This is a 2007 People 250. Thanks-  |
|
|
|
Post by chaz12 on Oct 8, 2012 12:48:38 GMT -5
It appears to go near the green wire. It looks like it could go there from the photo..
|
|
|
|
Post by ce on Oct 8, 2012 14:17:37 GMT -5
Yeah, it goes on the nub next to the green wire, it's a temperature or throttle position sensor.
|
|
jevid
New Puppy Dawg
Posts: 4
|
Post by jevid on Oct 8, 2012 14:19:20 GMT -5
That does look like the obvious spot...it just seemed liked I would be mixing electrical with mechanical since it's like a wire going into a nipple? Having no idea what this component is doesn't help either  |
|
jevid
New Puppy Dawg
Posts: 4
|
Post by jevid on Oct 8, 2012 14:20:53 GMT -5
ce - thanks, I'll try and re-attach it and if it appears to fit correctly, I"ll assume that's the spot. Do you think having it off would affect performance any, or is it just a cold weather starting aid? Thanks -
|
|
|
|
Post by tvnacman on Oct 8, 2012 14:34:47 GMT -5
Did your temp work?
John
|
|
jevid
New Puppy Dawg
Posts: 4
|
Post by jevid on Oct 8, 2012 15:49:18 GMT -5
Good question John - I'll pay attention on the way home and see if it does! |
|
