|
|
Post by kensworld5 on Sept 26, 2012 18:31:03 GMT -5
Has anyone installed a bike computer on a 250B. I would appreciate feedback and pictures if you're out there. thanks, ken
|
|
|
|
Post by trailheadmike on Sept 26, 2012 19:46:01 GMT -5
|
|
|
|
Post by prodigit on Sept 27, 2012 9:59:54 GMT -5
Just make sure the bicycle computer's cable is long enough.
I had issues of it being just large enough to be installed on a ~50cc scooter;
Larger scooters may have more space between the wheel and dashboard.
|
|
|
|
Post by scooteritch on Sept 30, 2012 21:04:44 GMT -5
Now days, there are plenty of inexpensive wireless speedometer for bikes so you will not have to deal with all the wires.
|
|
|
|
Post by skuttadawg on Sept 30, 2012 21:09:53 GMT -5
|
|
|
|
Post by prodigit on Sept 30, 2012 21:36:19 GMT -5
I actually installed the magnet on the spokes of my bike, and installed the magnetic sensor on the brake cable. turns out there's an opening of ~1 inch, but if the magnet is on the outside of the center of the spokes, the speedometer reads the results just fine.
I feared that perhaps on the inside of the wheel, the magnet would pass the sensor too slow, and on the outside too fast...
|
|
