|
|
Post by hotpipes on Sept 22, 2012 10:13:48 GMT -5
Just got my new Jonway 250cc scooter started and I found that my turn signals don't work. Any suggestions?
hotpipes
|
|
|
|
Post by justbuggin on Sept 22, 2012 10:19:43 GMT -5
heck all the wiring and make sure all connectors and hook up right
|
|
|
|
Post by Scooter Elements on Sept 22, 2012 10:43:55 GMT -5
heck all the wiring and make sure all connectors and hook up right dont heck but check ;D lol but yea check all your wiring. could be a defective turn signal relay. |
|
|
|
Post by tvnacman on Sept 22, 2012 10:52:08 GMT -5
spray the switch with WD40 work it back and forth like a hundered times see if they start to work . Key off when spraying and working back and forth , wipe off excess then try the signals .
John
|
|
|
|
Post by chaz12 on Sept 28, 2012 10:14:53 GMT -5
After 4 years and 6000 miles, my bright light switch went out. It no longer worked. It don't matter what was done, the lights would not come on. So ordered a new dimmer switch and now everything works again. Parts do go bad..
|
|
|
|
Post by hotpipes on Nov 21, 2012 20:22:03 GMT -5
heck all the wiring and make sure all connectors and hook up right I unpluged the line to the turn signal switch and pluged it back in and all is good. Thanks to all who responded!!! |
|
