|
Post by progenitor04 on Sept 18, 2012 17:10:14 GMT -5
my bike was jus working 100 this mornin..jus got the new racing cdi in today. went to install it and bike turns over but no start.. so i put my stock cdi back in and it does the samething now.. so i take out the spark plug check if it was wet and its dry and theres no spark.. so im thinkin coil?.. its the og stock one and wire
|
|
|
Post by derbi on Sept 18, 2012 17:12:39 GMT -5
If the Plug was dry your not getting fuel either.
|
|
|
Post by progenitor04 on Sept 18, 2012 17:40:14 GMT -5
If the Plug was dry your not getting fuel either. after reading that i went and check it its getting fuel
|
|
|
Post by millsc on Sept 18, 2012 17:57:01 GMT -5
take the plug out put it in the coil put the plug on the frame or metal and crank it see if theres spark it should arc
|
|
|
Post by progenitor04 on Sept 18, 2012 18:43:12 GMT -5
millsc this is the 2nd thing i thought of wen i noticed the plug wasnt soakin wet.. and i got no spark at all
|
|
|
Post by carasdad on Sept 18, 2012 18:54:23 GMT -5
|
|
|
Post by millsc on Sept 18, 2012 19:08:51 GMT -5
|
|
|
Post by progenitor04 on Sept 18, 2012 20:04:03 GMT -5
i jus ordered the red hot coil from scrappys shud be in in bout a week or 2
|
|
|
Post by carasdad on Sept 18, 2012 20:29:19 GMT -5
Curious as to why you don't check your electrical system...vice tossing random parts in? It may end up being costly...buying parts...only to find they were not needed and the problem was something as simple as a loose ground wire...or like above in the link I posted..
|
|
|
Post by progenitor04 on Sept 19, 2012 21:49:36 GMT -5
i was planning on getting it anyway with my next paycheck.. but now im ahead of schedule on my performance list..... im hopin this will be the problem.. if i feel like checking my elec sytem with the link u provided above before the coil comes in i will ... but untill then ill rely on hope.. till i have no other choice.. if i check the system before then ill post.. a loose ground sounds prominnent though since i was riding thru coble stones the other day and my float drain plug shook off, (used preventive measures by using and old screw and caulking) air fuel has changed, and my handle bars got really loose
|
|
|
Post by progenitor04 on Sept 20, 2012 11:38:03 GMT -5
well today i noticed one of my local scoot shops are scammers... manifold bolts were loose and stripped and a torn gasket....cylinder spark plug feels like it cud be stripped.... horrible rewiring job.. and i checked the coil out today i used a test light on the green wire connecting to it and got nothing?
|
|
|
Post by mikeb42 on Sept 21, 2012 15:40:50 GMT -5
Well i got a new Performance CDI today and it dont work either, no spark, so im getting a new one soon from E-Bay (Replacement) hopefully it works, got a Keihin carb and works great! 6g slider weights, i can do about 40 m.p.h. on my tao tao atm50-a1
|
|
|
Post by progenitor04 on Sept 21, 2012 17:38:45 GMT -5
Well i got a new Performance CDI today and it dont work either, no spark, so im getting a new one soon from E-Bay (Replacement) hopefully it works, got a Keihin carb and works great! 6g slider weights, i can do about 40 m.p.h. on my tao tao atm50-a1 did u put ur old cdi bak in and start it?
|
|
|
Post by progenitor04 on Sept 23, 2012 9:51:37 GMT -5
got the coil in yesterday, wasnt the problem ima do the switch bypass today maybe
|
|
|
Post by carasdad on Sept 23, 2012 10:09:38 GMT -5
got the coil in yesterday, wasnt the problem ima do the switch bypass today maybe Also check the voltage coming from your stator..should be the red wire..set meter to AC and crank it over... tell us what ya get..
|
|
|
Post by progenitor04 on Sept 23, 2012 12:14:36 GMT -5
i have anotha spare stator on another qmb that i jus tried takin off jus incase.. do u need a pulley remover or suttin?
jus checked power from the stator on my bike and got a zero reading from red wire and i also tried yellow
|
|
|
Post by progenitor04 on Sept 28, 2012 10:05:34 GMT -5
is there an upgraded stator i can get?
|
|
|
Post by progenitor04 on Feb 27, 2013 9:38:55 GMT -5
i fixed the problem, somehow the coils in the magneto got ripped apart by a bolt, so i replaced it wit an old one i had.. new cdi werks great cant wait for summer
|
|