|
|
Post by richardthescooter1 on Sept 18, 2012 11:57:50 GMT -5
Hi Dawgs  Notice last night going home from work, each time a had to stop at red or stop sign, my rpm's started to droping  had to rev it up to keep them up. What the world going on  Attachments:
|
|
|
|
Post by jimboeau on Sept 18, 2012 12:03:35 GMT -5
Could be a few things:
1 Idle need adjusting
2 fuel air mixture needs adjusting
3 vacuum leak
4 valves need adjusting
my guess is valves need adjusting.
|
|
|
|
Post by richardthescooter1 on Sept 18, 2012 13:17:10 GMT -5
I'll check it out, thanks jimboeau, after awhile the idle will go back up and stay at 1900rpm's.
|
|
|
|
Post by JohnnyC on Sept 18, 2012 14:07:00 GMT -5
I had a very similar thing going on with my scoot and decided to make it easier for me to adjust on the fly. See the following thread for my solution to idle adjustment issues.  External Idle Adjustment |
|
|
|
Post by richardthescooter1 on Sept 18, 2012 14:49:27 GMT -5
That is a great idea, but mine adjusting screw is on top to the right side of carb.
|
|
|
|
Post by richardthescooter1 on Sept 19, 2012 13:04:34 GMT -5
I think I found the problem, its my enricher, I came to work today (13 miles) and check my enricher, it wasn't hot at all, it was barely warm to the tough.
|
|
|
|
Post by JohnnyC on Sept 20, 2012 2:04:04 GMT -5
Oh, the automatic choke? I sure wish our bikes came with a manual choke... Perhaps that will be one of my future projects.
|
|
|
|
Post by richardthescooter1 on Sept 21, 2012 13:48:41 GMT -5
Still have starting issues, it take several cranks to start, after about 3 or 4 cranks it will start for about 2 seconds and it will keep this up until finally it will start. today tryed to start scoot, acted the same way, but this time I ran the battery down, (had an issue with a cracked intake manifold, fix with liquid tape and wrap with elictric tape) I think this may be the problem again. I'll show pic of intake before I fix it)
|
|
|
|
Post by richardthescooter1 on Sept 21, 2012 13:49:24 GMT -5
Here is pic. Attachments:
|
|
|
|
Post by richardthescooter1 on Sept 24, 2012 15:50:50 GMT -5
Problem solved, intake manifold again. Fixed back on the road again:)
|
|
|
|
Post by richardthescooter1 on Sept 24, 2012 15:51:15 GMT -5
Problem solved, intake manifold again. Fixed back on the road again:)
|
|
Notice last night going home from work, each time a had to stop at red or stop sign, my rpm's started to droping 
had to rev it up to keep them up. What the world going on 
