|
|
Post by rlamp4040 on Sept 8, 2012 14:03:42 GMT -5
It just whines. Sarter works changed cylinoid took off gear cover gears are all turning. When you try to start it it just whines and does not even try to turn over the engine. I have checked all the connections, fuses...etc. Not getting any compression at spark plug-plug looks good. Any ideals?  ? Thanks |
|
|
|
Post by skuttadawg on Sept 8, 2012 14:04:28 GMT -5
Check the bendix
|
|
|
|
Post by rlamp4040 on Sept 8, 2012 14:13:52 GMT -5
whats a bendix?
|
|
|
|
Post by skuttadawg on Sept 8, 2012 14:14:50 GMT -5
The gear that starts the engine
|
|
|
|
Post by rlamp4040 on Sept 8, 2012 14:23:42 GMT -5
Is that something that can be seen from just looking in were the gears are because anything other then that and I am lost
|
|
|
|
Post by skuttadawg on Sept 8, 2012 14:29:13 GMT -5
Remove the CVT cover
|
|
|
|
Post by rlamp4040 on Sept 8, 2012 14:30:57 GMT -5
I removed some cover and all the gears seem to be moving
when I turn it over
|
|
|
|
Post by rlamp4040 on Sept 8, 2012 14:34:19 GMT -5
I think I took off the wrong cover
|
|
|
|
Post by skuttadawg on Sept 8, 2012 14:39:33 GMT -5
Left side ?
|
|
|
|
Post by rlamp4040 on Sept 8, 2012 15:17:08 GMT -5
okay I just took off the black CVT cover. Should I take off the metal cover too. I can see a big bolt but I don't know what that goes too. I know it does not turn when I try to start it.
|
|
|
|
Post by richardthescooter1 on Sept 8, 2012 15:57:12 GMT -5
Have any pic's?
|
|
|
|
Post by richardthescooter1 on Sept 8, 2012 15:59:18 GMT -5
I think this is what you should be looking for. Attachments:
|
|
|
|
Post by rlamp4040 on Sept 8, 2012 16:10:58 GMT -5
Thats a starter. It works...
|
|
|
|
Post by rlamp4040 on Sept 8, 2012 16:12:10 GMT -5
atleast when I take it out and give it juice it spins, which means it works no?
|
|
|
|
Post by rlamp4040 on Sept 8, 2012 16:13:07 GMT -5
I took the gear cover off where the starter gears engage the other gears. They all turn but nothing is engaging the motor.
|
|
|
|
Post by rlamp4040 on Sept 8, 2012 16:14:59 GMT -5
now I am on the other side where the belt is it is not engaging when I try to start it
|
|
|
|
Post by richardthescooter1 on Sept 8, 2012 19:22:26 GMT -5
Check your ignition coil wire, about two months ago my scoot would not start, turned out to be the wire in the spark plug cap was pushed aside not making contact and the wire going into the cap was loose. check those connection at your regulator also and CDI.
|
|
|
|
Post by richardthescooter1 on Sept 8, 2012 21:28:30 GMT -5
I don't believe the variator or clutch will engage until the scoot is started
|
|
|
|
Post by rlamp4040 on Sept 8, 2012 21:33:27 GMT -5
I guess this is how scooters reach their final resting spots. Don't have the knowledge or money to just keep buying different parts to see if thats it. Bummer-anyone live near simi valley,ca that wants a scooter cause I aint putting up with this very long lol
|
|
|
|
Post by richardthescooter1 on Sept 14, 2012 13:11:12 GMT -5
rlamp4040, whats happening? any updates on scoot.
|
|
? Thanks