|
|
Post by ezbreazzy on Sept 2, 2012 16:43:11 GMT -5
Hey all just a quick question about my 2008 260cc aeolus scooter what should the idle RPM's be set at? I installed one of those cheapy Tachometers i found on ebay its the black one around 12.00 with the hours on it too. Shows the idle speed is 630RPM's im thinking it should be higher......or is that about right?
|
|
|
|
Post by wile on Sept 2, 2012 17:08:35 GMT -5
Is that 260 a two cylinder job if so you need to set the tach to 2.
Wile
|
|
|
|
Post by ezbreazzy on Sept 2, 2012 17:16:49 GMT -5
No 1 cylinder 4 stroke
|
|
|
|
Post by wile on Sept 2, 2012 17:28:33 GMT -5
Well then something is not right with the tach settings I don not believe it will stay running at those low rpms. It has to be over 1000 rpms around 1500-2000 rpms on the 250S+.
So read the instructions on the tach settings
Wile
|
|
|
|
Post by ezbreazzy on Sept 2, 2012 19:17:33 GMT -5
Ok thanks....read through the instructions once again and found the proper setting it is ideling around 1320RPM's it runs pretty good at that idel but think i'll bump it up alittle to smooth it out more.
|
|
