|
|
Post by scootinround68137 on Aug 25, 2012 21:22:47 GMT -5
![]() So here are some pics of my new(used) tomberlin 250cc all torn down to the frame and motor. Wondering if anyone else out there has one of these engines. I believe it is a cn250 clone. But I havent found any carbs on any scooter sites like this one. Problem I am having is with the carb itself, missing a couple of hoses on the ride side opposite side from the throttle cable. There was on small hose on the top with a 90 degree angle that was shredded through and only an inch of tubing there. . The other attaches to the bottom of the carb and was just a straight piece about 4 inches long. I was also wondering if anyone has the intake/exaust shaft adjustments on the outside of their engine like mine does. I included pictures of that as well and was wondering if anyone could give me an idea of what the markings mean and where I should adjust these for best performance. Thanks for all the help!! Attachments:
|
|
|
|
Post by richardthescooter1 on Aug 26, 2012 7:40:22 GMT -5
First arrow, my carb has the same thing, its nothing, seccond arrow looks like drain hose.
|
|
|
|
Post by richardthescooter1 on Aug 26, 2012 7:41:10 GMT -5
Here is my carb. Attachments:
|
|
