2012 Cyclone Carburator

[msgusaf]

What is a good carburator for the 2012 Ice Bear Cyclone? There are too many choices for a newbie like myself.

[wiredgeorge]

I have a 150cc Icebear and it uses a clone of a constant velocity Keihin carburetor. I happen to know a bit about carburetors and the one that came on the bike is pretty decent quality... It is a Chinese carb and I can't recall the name but it takes Keihin jets; I would just take out the OEM jets and swap with their Keihin equivilent. The slow jet is N424-16 type and size #35. The main jet is Keihin type and is somewhere from 100-120 size by the look of it but it isn't marked for size. I have asked about the size in another thread and no one answered.

You can buy a good quality Japanese made carb if you like but I don't feel it is worth spending the money. If you do, measure the inside diameter of the end that fits into the carb holder atop the engine. This is the size... you will likely also have to get one with the electronic choke as it would be a bit of a pain to run a cable to the handlebars for a mechanical cable actuated choke.

[msgusaf]

;D Thanks for your quick answer.