|
|
Post by suburbanking on Aug 2, 2012 8:55:45 GMT -5
Could anyone tell me what type of fluid to use in my transmission and about how much. Also where do you drain and fill. When I checked the level it looked milky white. At low speeds it makes a rattle sound. It's a 2008 and I'm sure it has never been changed and has 7200 miles on it.
|
|
|
|
Post by richardthescooter1 on Aug 2, 2012 11:06:30 GMT -5
Here is my fill hole (I have 250cc roketa, yamaha/linhai clone) Attachments:
|
|
|
|
Post by prodigit on Aug 2, 2012 12:28:43 GMT -5
If the fill hole is on the top, just drain the gearbox (screw on the bottom of the gearbox), and fill up with 80W90 oil. It works for most transmissions and gear boxes!
Fill the cap until oil reaches the top.
If the oil fill hole is on the side, also drain, and then just fill, until oil comes back out on the fill hole.
|
|
|
|
Post by richardthescooter1 on Aug 2, 2012 13:14:00 GMT -5
On my roketa no more than 6-7oz only. Look at your manual book. you don't want too over fill it.
|
|
|
|
Post by prodigit on Aug 2, 2012 14:49:13 GMT -5
on my bms, you actually have to fill it to the top!
I don't know why, perhaps it has something to do with the center shock system?
|
|
