|
|
Post by catrell92 on Jul 31, 2012 2:10:59 GMT -5
Ordering a BBk kit for my CN250 engine. Was wondering if you need a special tool to pull off the stator magnetic gold bowl looking thing lol. I accidentally dropped the cam chain in the crancakes also. Would i be able to accesss it after i pull the magneto gold bowl thing? Has anyone ever intalled a bbk on this engine? Was there a noticeable increase? I just about have everything town down.
|
|
|
|
Post by richardthescooter1 on Jul 31, 2012 16:53:08 GMT -5
Show some pic's
|
|
|
|
Post by silas on Aug 1, 2012 5:53:00 GMT -5
You would have to split the crankcase for access to the cam chain in the bottom end. I would suggest a coat hanger bent at a 90degree angle at the end, making about a 1/4" tip to reach down into the bottom end to snag the chain and pull it back up.
Silas
|
|
|
|
Post by catrell92 on Aug 1, 2012 8:14:36 GMT -5
Yeah i split the cases already. Part of the reason was that i need to reseal the motor bexause of an oil leak. Also how do i remove the piston circlips. Do i need a speacial tool?
|
|
|
|
Post by silas on Aug 1, 2012 13:27:07 GMT -5
They probably make a tool for it but I wouldn't buy it. You can just pick at the circlip to pull it out of it's seat, with a dental pick or something like that. If there is a little room behind the clip, it would probably be easier to push one end of the clip out of the groove. Once out of the groove it comes right out.
Silas
|
|
|
|
Post by catrell92 on Aug 1, 2012 14:15:13 GMT -5
|
|
