|
|
Post by robert1c on Jul 30, 2012 17:17:23 GMT -5
Hi Guys,
My 250B's ignition switch broke apart and the bike is on the other side town.
is there a way to bypass the ignition to start the bike so that i can get it home?
HELP please the small lights are on!!!
Thanks,
Robert1c
|
|
|
|
Post by acntvman on Jul 30, 2012 20:52:43 GMT -5
Did ypu post a pic of it ?
John
|
|
|
|
Post by robert1c on Aug 1, 2012 8:03:01 GMT -5
|
|
|
|
Post by dumbass on Aug 1, 2012 9:23:09 GMT -5
Are you sure it fell apart or just fell out? Mine came unscrewed when the bike was new and I couldn't use the key until I tightened the screws. I was lucky because it happend in the parking lot of a hardware store. So I was able to buy a philip SD and tighten them. Of course as soon as I got home I took it apart to do it right.
Bob
|
|
|
|
Post by robert1c on Aug 1, 2012 11:34:07 GMT -5
my nephew was riding it to work and it pulled out and all the springs and tumblers went everywhere.
|
|
|
|
Post by Scooter Elements on Aug 1, 2012 11:37:18 GMT -5
if your scooter has a kick start what i have done not sure if all scooters are the same is i just disconnect the plug from the wire harness and kick start it. Starts right up
|
|
|
|
Post by acntvman on Aug 1, 2012 11:39:32 GMT -5
No kick start on 250's
John
|
|
|
|
Post by robert1c on Aug 1, 2012 12:12:09 GMT -5
No No kick Start. i got it home. now i want to but the replacement iginition switch but im not sure what im looking for. (how many wires, body style to fit frame).
|
|
|
|
Post by Scooter Elements on Aug 1, 2012 12:21:32 GMT -5
No No kick Start. i got it home. now i want to but the replacement iginition switch but im not sure what im looking for. (how many wires, body style to fit frame). Remove yours and look at it and see if any of these are the same www.partsforscooters.com/Welcome?search=Keyyou can also give them a call and they will help you out |
|
|
|
Post by dumbass on Aug 1, 2012 16:47:48 GMT -5
|
|
|
|
Post by robert1c on Aug 5, 2012 9:30:21 GMT -5
Thanks guys, I got it out. Its a 6-pin from the ignition switch to the plug and 4 wires into then scoot. Ill post pics later this week. I found two options. 1) just the ignition switch. 2) all 3 matching locks.
Thanks guys!
|
|
|
|
Post by robert1c on Aug 5, 2012 9:34:29 GMT -5
Thanks guys, I got it out. Its a 6-pin from the ignition switch to the plug and 4 wires into then scoot. Ill post pics later this week. I found two options. 1) just the ignition switch. 2) all 3 matching locks.
Thanks guys!
|
|
