|
Post by frank11 on Jul 28, 2012 15:52:23 GMT -5
Anybody know of a service manual for the mc54b that has the rear wheel with all the seals and the shaft from the clutch to the rear wheel. thanks all
|
|
|
Post by richardthescooter1 on Jul 28, 2012 17:51:19 GMT -5
Whats the problem? I have the mc-54-250b roketa scooter Which one do you have 257 linhai/yamaha clone or 244 honda/cfmoto clone?
|
|
|
Post by frank11 on Jul 29, 2012 1:38:26 GMT -5
Hi richardthescooter1, I have the Mc54B 257cc roketa scooter. The problem I am having is that the rear is leaking into the right side of the wheel. not the left side where the clutch is and where the rear oil seal go's. The man who I took it to said that there is a bearing where the shaft comes through the housing on the right side.and it looks like that is where it is leaking. He said that if he had a manual that maybe he could fix it without tearing everything apart.
|
|
|
Post by richardthescooter1 on Jul 29, 2012 7:27:21 GMT -5
The bearing on the right side is in your swing arm, which holds your tire on, they are a sealed bearing, have you taken off your cover to look inside the variator/clutch area? there are two bearing in this section, one behind the variator and another behind your clutch. I just wondering if you have a leak coming from another area, thats leaking on that bearing?
|
|
|
Post by leo on Jul 29, 2012 10:11:42 GMT -5
Hi richardthescooter1, I have the Mc54B 257cc roketa scooter. The problem I am having is that the rear is leaking into the right side of the wheel. not the left side where the clutch is and where the rear oil seal go's. on the 244 there is an oil seal inside the final drive. if this seal is damaged it will cause oil to leak out of the right side. there are other reasons for this leakage, a cracked case for example. removing the wheel will tell you where the oil is coming from. you will have to disassemble the final drive to replace the oil seal. this oil could also be coming from the crankcase vent hose.
|
|
|
Post by frank11 on Jul 29, 2012 13:01:59 GMT -5
Hi all, Thanks for the info. I know where the leak is. and all need is a manual so the guy that who is doing the work can do it quicker I am paying by the hour dose anybody know where i can get one.
|
|
|
Post by richardthescooter1 on Jul 29, 2012 16:18:57 GMT -5
Down load the 250cc yamaha majesty manual, Its pretty close to what you have.
|
|
|
Post by frank11 on Jul 30, 2012 1:23:36 GMT -5
Thanks richardthescooter1, I hate to ask but do you know where I did a search and came up with nothing of use.
|
|
|
Post by richardthescooter1 on Jul 30, 2012 7:34:54 GMT -5
frank11, I pm you.
|
|