kandi 250cc md trike rear axle bent

[garyx1]

i have a cyclone 250cc automatic i lifted it up started it spun the rear wheel wow way out of balance took it off tried with no wheel still wobbles all over can any body help please.

[OverReved]

You have one of these?


If you are getting an oscillation vibration by removing both the rim and the tire then you need to look at your output shaft for the rear wheel and determine if it is bent. Simple as that, if it's bent replace it.

[wile]

[rapidjim]

Jul 25, 2012 11:21:43 GMT -5 garyx1 said:

i have a cyclone 250cc automatic i lifted it up started it spun the rear wheel wow way out of balance took it off tried with no wheel still wobbles all over can any body help please.

Also check the bearing for the output shaft.

[Parker2100]

Awesome machine. Your lucky its the back and not the front (so I hear with these). No matter what anybody says, I would take one if I had the cash.

[garyx1]

its has 400 miles now drove it last night it's just awesome.

[kixome]

Awesome but for nearly 4g you could have had a lot more machine if you bought it new.