Left Hand Control pictures

[robert1c]

Hi Guys,

I’m new to the forum and new to scooters (about 2 weeks). I have been lurking here every day reading and learning from what you all have posted about the 2008-Roketa 250B (linhai).
My issue is the headlights were stuck on high so I decided to replace the left hand control switch. The parts shop only had the 9-pin connector and my bike has the 6-pin. I have been able to make all the connections and the head lights, horn and right blinkers work. What is not working is the left hand blinker and the push-in function to turn the blinker off. I had to take a part the control switch to see in side what wire went where. Now what I’m looking for is a picture on the inside of the control switch so that I can make sure I put it back together.

Hopefully someone on here can help me out or guide me to a site/link that would have this picture on an exploded view of one so that I can make sure I put it back together correctly.

[scooteritch]

robert1c - It just happen that I replaced my left electrical assembly so I have the old one off of my bike. However, my scooter is a Linhai 260 and not sure if these are all the same even on the Rocketa 250B.

Here is the image of what I have and let me know if this what you have. Also, my connector has a place for 9 pins but I have only 7 physical pins.



If this is close to what you have, I will take it apart and take a picture for you.

Thanks -

[robert1c]

Hi Scootrerich, Thats actually the one I took apart. My Linhai has a 6-pin connector (thats why I dis-malted it). if you could please post a pic of the top and bottom half that should do so that i could get this put back together. Thanks a million.

[scooteritch]

robert1c - Sorry for the delayed posting of the image you wanted. I finally remembered tonight.







Hopefully, all the image makes sense.

Thanks,