2011 Jonway 250cc

[Deleted]

Ok So im new to this forums, i apologize if this don't belong here, last week i took delivery of a 2011 Jonway 250cc scooter, same as a Linhai and Rocketa the bike is awesome, but a small issue, after riding or being running for about 20 minutes, it will stall and die, after it dies, there is nothing you can do to get it started again, you can let it sit for about 45 to an hour and crank it and there she goes, i called the dealer and they are sending me a new Carburator for it, but im not sure if the Carburator is the problem because once is cools down it will run fine, i read in another post here, about the Linhai 300 scooter, that has the same exact problem as im having and they replaced the CDI and that fixed it, anyone else had the issue corrected let me know thanks.

Attachments:

[richardthescooter1]

You either have a bad ignition coil, or you need to adjust the valves .004 intake .006 exhaust.
or it could be a bad CDI, I thinking the latter two.

[Deleted]

I tested the CDi by taking it out of the scooter after the scooter cuts off, placed it on the AC vents for about 10 minutes and put it back and the scooter start it, so i finally figure it out. :-) now just gotta wait for the dealer to send me the new CDi

Quick update

After seeing my lights flicker while running the scooter after dark, i discover that a 10 amp fuse that controls the temperature sensor, had melted after i turn the radio that came in installed on the scooter, apparently the radio is wired in a way that is drawing to much power and is overloading the circuit, i changed the fuse, and haven't turn the radio on again, and havent had any issues with the bike.