|
|
Post by bootscootboogers on Jun 28, 2012 11:42:30 GMT -5
My scooter is making rattling noise when i ride down the street. i put it on the center stand and the rear wheel bearings seem to be bad. Is this right?
|
|
|
|
Post by richardthescooter1 on Jun 28, 2012 12:57:19 GMT -5
Is the bearing your talking about in your swing arm  This is where your axle comes through and at the end your axle nut, or are you talking about the CVT area? |
|
|
|
Post by ustitanmp150 on Jun 30, 2012 15:19:57 GMT -5
I wonder if it could be the muffler loose or the gas tank?
|
|
|
|
Post by greg on Jun 30, 2012 15:48:14 GMT -5
when you apply the rear brake does the noise go away?
|
|
|
|
Post by max on Jun 30, 2012 16:09:27 GMT -5
I have a 260 and had a simular problem. Found the variator splines were worn down causing the noise. Additionally the splines on the crank had some wear and I found this before major problems would have been worse.
I'm glad I did find it because the scooter runs better than ever.
Max
|
|
This is where your axle comes through and at the end your axle nut, or are you talking about the CVT area?