Aeolus 300 Headlights - solved, but another ques.

[cloudsifter]

I've looked at pages and pages containing the term Aeolus 300 headlights using the google search function at the bottom. Even looked at the thread where it 'talks' about it, but doesn't go into detail into exactly what to remove.

I have my headlights purchased, in hand.
Have gotten as far as you see in this video below.

Can I please get some additional help in how to remove more and where the fasteners are?

I can't believe how good the forum is, with enough searching I can usually get to what I need.

Can the gurus please smile upon me- or just someone who's done it before and is familiar with this scooter?

Thank you so much in advance. I cannot believe how much fun and how liberating it is to finally (for a couple weeks now) riding a bike- ok "scooter". But- you guys already know that, some of you for YEARS now.

Thank you,

James

[cloudsifter]

Well, I started just digging in further, afraid I would remove the wrong screw and all would come tumbling down.....it didn't... but still in process... so just took a quick break.

[cloudsifter]

Got the job done. Road around tonight. Lights are brighter, hi beam lights up anything reflective for a good ways ahead.

Low beam, is brighter, and so helps more, but I do wish I could adjust it to throw farther. I adjusted it, but at some point the adjustment felt like it was going to come loose, could have been just me, not sure.


All in all, success on the headlight change.

[linhai300]

guess you found out you had to take the instrument panel off to be able to reach down inside the front alot of little parts that can get lost,since ive purchased my L300 ive taken it completely apart bolt by bolt screw by screw the headlight adjustment bolt is not very tight once you get it all back together under neath the front of the headlight fairing you can reach underneath n adjust the headlights if you have not figured that out yet but seems you may have enjoy

[cloudsifter]

Thank you Linhai300.

Can you tell me how much play there is in the adjustmet of low beam?
I.E. if I turn to far, will the adjustment screw just fall out? I didn't want to go too far for fear of this.

Also, have you done the power outlet install? I had read about it, just not sure what to take off to get in behind, ( and not sure if it's detailed on which panels to take off in the forum).

James