DF150TKA - stalls at stop signs

[odessa29073]

Finalized the prep for the trike a few days ago and rode the first 50 Mi (80km). Have hardly a reason to complain. Only inconvenience an occasional stall at stop signs.
I guess I must set the idle a little bit faster. If that is correct ... how do I do that? I haven't even tried to access the engine compartment yet. Where and how? Hatches under seat?
Would appreciate some suggestions .... thanks

[skuttadawg]

Valves too loose will do that as well as mine got like that but after adjustment it was new again . If real bad a size up idle jet may help if needed

[rapidjim]

.005 inch on the exhaust may be a bit wide. If you get to much "valve noise" lower the exhaust to .004 inch.

Jim

[odessa29073]

Hi ... you guys are good, Wile, skuttadawg and Jim! I won't be able to work on it today or tomorrow, but you put me on the right track .... especially with instructive picture. Thanks.

[ibtrikin]

If raising the idle doesn't help and you don't have vacuum leaks, adjust the valves.