|
Post by worewren on Feb 25, 2012 1:51:38 GMT -5
Anyone have a diagram for the hoses on this carburetor? Attachments:
|
|
|
Post by bikerdude on Mar 4, 2012 9:58:58 GMT -5
Just removed all those hoses on my viper. What do you need?
|
|
|
Post by bikerdude on Mar 5, 2012 1:07:23 GMT -5
Sent you the entire manual...
|
|
|
Post by skuttadawg on Mar 5, 2012 1:52:52 GMT -5
Wow that looks like a sweet ride and fun to enjoy . Red cars go faster lol so enjoy it safely
|
|
|
Post by worewren on Mar 9, 2012 20:05:07 GMT -5
Okay this is the driver's side of the carb Motobuy tech told me two hose connected together where not needed? Attachments:
|
|
|
Post by worewren on Mar 9, 2012 20:09:47 GMT -5
Hose on the passenger side of the carb where cut and not hooked up when I got the trike. F is the fuel line going to the carb, B is not connected to anything. A and D connect to each other. E goes down to the a radiator line G in next photo, are these correct and where should B go to? Attachments:
|
|
|
Post by worewren on Mar 9, 2012 20:10:46 GMT -5
E goes down to G here? Attachments:
|
|
|
Post by worewren on Mar 9, 2012 20:13:52 GMT -5
Everytime I take the trike out something falls off or comes undone. I do not like the clamps on the hoses. Last drive I find the silicon rectifier hanging down from its wires? Where should it be?
Trike won't start.
That for any guidance you can give me the manual's photo where so dark I could not see where the hoses went, but the rest was helpful.
|
|
|
Post by worewren on Mar 9, 2012 20:15:39 GMT -5
forgot to add photo of having rectifier. ;D Attachments:
|
|
|
Post by bikerdude on Mar 10, 2012 17:57:52 GMT -5
The rectifier is welded to a thin plate on the forward facing tube frame, re welded mine fell off in 10 Min's again, ground off crappy metal and remounted. That was my very 1st question to you if it fell off yet.. LOL I have been working on mine for months, A Lot of upgrades. The owners manual has good pix did you get one?
The metal edge that breaks off is VERY SHARP dont look for it like I did got nice cut, its right behind drivers seat frame tubing
|
|
|
Post by worewren on Mar 10, 2012 21:54:30 GMT -5
Thanks, Yeah I can see this is going to be a long process, probably not starting because of the lack of ground, Right?
|
|
|
Post by worewren on Mar 10, 2012 21:56:04 GMT -5
Didn't get the owners manual, just the copy you sent. Pictures did not come thru very good on that, they are all dark. How about the hoses do they look right?
|
|
|
Post by bikerdude on Mar 18, 2012 6:54:42 GMT -5
They seem to have tapped off of the radiator hose, ran it to the side of the carb and back out, That is a carb warming device, I read on here. I removed that cluster, the auto choke assy gets plenty hot. Did you get the rectifier remounted. I just ziptied mine when it fell off. now have it bolted to a nice bracket I welded. Get it running yet?
|
|