|
|
Post by crazyd on Aug 5, 2011 13:50:10 GMT -5
My rear sprocket is out of alignment with the front one and I can hear the chain links click on the side edge as I manually roll the trike. It's off to the left. I backed off on all the numbered screws to see if I could shift it to the right to no avail. All I get is back and forth movement for chain tension. Any Ideas? Thank you much! Attachments:
|
|
|
|
Post by edfr on Aug 5, 2011 14:30:05 GMT -5
What kind of Trike do you have is it a 150 or 300?
If the 150 you have to loosen the Bolts on the brackets that hold it to the frame on top of the bracket, then loosen the adjustment screws just a little about one turn on each no more. If its Off to the left start tightening the RIGHT SIDE adjustment screw to bring the axle IN on the right side. Once it is straight TIGHTEN THE BIG BOLTS that attachs to the Frame on top the ones you loosened. Then Finally tighten the Adjustment screws NOT TO TIGHT Just until they seat nice and firm.
Lefty
|
|
|
|
Post by crazyd on Aug 5, 2011 23:47:08 GMT -5
Thanks Lefty, I just got in from working my butt off on it. I'm not mad as I knew what the deal was before hand. Without reading your reply I managed to get it to move a bit closer to where it should be. I will post more on that soon and will try your suggestion ASAP. Mom's looking for the kid this weekend...;o) It's an Ice Bear what's not to love.  I keep getting asked for a ride while it's bare skinned and on the jack in my driveway. Got to love it. David |
|
I keep getting asked for a ride while it's bare skinned and on the jack in my driveway.