|
Post by mike6736 on Jul 31, 2011 0:04:55 GMT -5
Has anyone changed there jets and went up one size??? Since I came into AR I just can not get the carb adjusted right. I was tiold to go up one size one both and it should solve the problem by one of the FMS techs...
It has been so hot here and muggy I just can not get it properly adjusted but than I have not been right myself in this muggy heat, much nicer in Florida
Mike
|
|
|
Post by edfr on Jul 31, 2011 0:07:24 GMT -5
Mike, If you cannot get the jets fast enough, Raise the Needle on the Diaphgram to richen it or Lower it to Lean it out. It is fast and you do not have to take the carb off. Lefty
|
|
|
Post by leeinark on Aug 3, 2011 9:34:08 GMT -5
Yep worked for me Mike and as you know I live in AR.
|
|
|
Post by mike6736 on Aug 3, 2011 11:29:13 GMT -5
Lee did you order the new jets or get local.....I want ..Want.....
Mike
|
|
|
Post by leeinark on Aug 3, 2011 11:37:22 GMT -5
Mike I did not order new jets just leaned my mixture some from the factory setting. I really don't see a need to change jets unless you change the amount of air you are allowing in to the intake AND the amount of exhaust you are allowing out. For example a new carb and a new exhaust system...then your scoot would be breathing much better and might require a little more fuel. The only way to know for sure is with an air fuel ration narrow band gauge or meter.
|
|