|
Post by hodala on Jul 26, 2011 7:30:49 GMT -5
my prototype and illustrations,kit developing soon completed
|
|
|
Post by hodala on Jul 26, 2011 7:37:13 GMT -5
my prototype and illustrations,kit developing soon completed no columns to add picstures? Attachments:
|
|
|
Post by hodala on Jul 26, 2011 7:39:20 GMT -5
prototype Attachments:
|
|
|
Post by hodala on Jul 26, 2011 7:40:39 GMT -5
illustration 01 Attachments:
|
|
|
Post by hodala on Jul 26, 2011 7:42:23 GMT -5
illustration 02 Attachments:
|
|
|
Post by sarge707 on Jul 26, 2011 15:16:04 GMT -5
Interesting- Maybe this tilting front end is catching on?
|
|
|
Post by Kiwiscoot on Jul 26, 2011 15:19:19 GMT -5
Pretty near design, you may be onto something here.
|
|
|
Post by hodala on Jul 26, 2011 17:08:59 GMT -5
my recent drawings Attachments:
|
|
|
Post by hodala on Jul 26, 2011 17:14:29 GMT -5
and this HPV month ago Attachments:
|
|
|
Post by savy09 on Jul 26, 2011 19:52:06 GMT -5
Do yourself a favor, if the prototype works... get yourself a patent asap with all your illustrations and a demo video of the prototype
Savy
|
|
|
Post by hodala on Jul 26, 2011 21:52:41 GMT -5
Do yourself a favor, if the prototype works... get yourself a patent asap with all your illustrations and a demo video of the prototype Savy thanks! prototype surely works well,few quantity production waiting for Laser cut plates and some other machining parts done to assembly then make vedeo Attachments:
|
|
|
Post by hodala on Jul 26, 2011 22:21:15 GMT -5
|
|
|
Post by hodala on Aug 8, 2011 22:33:10 GMT -5
process of production Attachments:
|
|
|
Post by hodala on Aug 8, 2011 22:34:38 GMT -5
some suitable models for modification Attachments:
|
|
|
Post by hodala on Sept 1, 2011 9:34:07 GMT -5
now Attachments:
|
|
|
Post by edfr on Sept 1, 2011 11:08:32 GMT -5
FANTASTIC!! You Da Man. How did you decide on how wide the front should be? Lefty
|
|
|
Post by hodala on Sept 1, 2011 11:19:18 GMT -5
FANTASTIC!! You Da Man. How did you decide on how wide the front should be? Lefty same width with handlebar,it leans when turning,don't need too wide
|
|
|
Post by hodala on Sept 1, 2011 11:30:34 GMT -5
FANTASTIC!! You Da Man. How did you decide on how wide the front should be? Lefty same width with handlebar,it leans when turning,don't need too wide tilting full floting front sus. Attachments:
|
|
|
Post by hodala on Sept 1, 2011 11:35:59 GMT -5
and a tilting lock will be bolted on soon Attachments:
|
|
|
Post by hodala on Sept 2, 2011 12:42:36 GMT -5
kit assembly (without paint & plated) Attachments:
|
|
|
Post by hodala on Sept 9, 2011 21:01:54 GMT -5
one more trike Attachments:
|
|
|
Post by edfr on Sept 9, 2011 21:20:34 GMT -5
On a tilt like the one on the right last picture, looks like it may just fall over with the rider at that angle. The Reverse Trikes that they are selling some have had problems of the scoot falling over on simple turns to much tilt.
I also do not see any type of springs or shocks or are you not at that point yet. Lefty
|
|
|
Post by hodala on Sept 9, 2011 22:22:23 GMT -5
On a tilt like the one on the right last picture, looks like it may just fall over with the rider at that angle. The Reverse Trikes that they are selling some have had problems of the scoot falling over on simple turns to much tilt. I also do not see any type of springs or shocks or are you not at that point yet. Lefty the tilting angle depends only on your balance like a bike,won't exceed unless you mean it black spring shock cheated your eyes
|
|
|
Post by mnfitz on Sept 17, 2011 14:27:48 GMT -5
I was working on a leaning, suspended tadpole trike very similar to your drawing. I was considering using tie-rod ends as my kingpin attachment points but was concerned there swivel angles would limit tilt of the trike. Are you able to tilt as much as you want to using them? Good looking stuff, by the way. Mike
|
|
|
Post by hodala on Sept 17, 2011 22:06:33 GMT -5
I was working on a leaning, suspended tadpole trike very similar to your drawing. I was considering using tie-rod ends as my kingpin attachment points but was concerned there swivel angles would limit tilt of the trike. Are you able to tilt as much as you want to using them? Good looking stuff, by the way. Mike Check this,30+ degree each side,normally no more than 15 Attachments:
|
|
|
Post by hodala on Sept 17, 2011 22:19:54 GMT -5
another example of a buggy Attachments:
|
|
|
Post by hodala on Nov 7, 2011 12:55:40 GMT -5
the Mod.Complete kit Attachments:
|
|
|
Post by adoga on Nov 7, 2011 14:06:18 GMT -5
That is totally awesome! Taiwanese ingenuity at its best!
|
|
|
Post by detonatortuning on Nov 18, 2011 20:00:07 GMT -5
hodala,
please PM me, i'd like to talk availability and pricing.
thanks, steve
|
|
|
Post by sarge707 on Nov 23, 2011 12:16:48 GMT -5
Great! Did you get any idea,s from the Sunny (Dongfang) Trike? Similar concept.
|
|