|
|
Post by edfr on Jun 12, 2011 22:19:45 GMT -5
Roy,
There should be a BIG ASS "C" CLIP right inside the Axle and the BEARING should stop the AXLE from coming out any further. Check if the "C" Clip is either missing or damaged and allowing the Bearing to come out further than where the "C" CLIP groove is at.
Lefty
|
|
|
|
Post by edfr on Jun 20, 2011 13:30:16 GMT -5
Hi Roy, 1. You will need a Hammer Type Puller: 2. Take the Tire off the HUB. 3. Take the HUB off. 4. Take the Dust cover out 5. Take the "C" Clip out which is in a Groove about 1/4 inch or so inside by the bearing. 6. Put the HUB back on Loose 7. Hook up the Hammer Type Puller onto Three or Two of the Bolts that hold the Rim onto the HUB. 8. Start Banging Back on the Puller. 9. WHOALA  Lefty Here is the Axle completely apart so you can see all the parts, "C" bearings etc.  |
|
|
|
Post by leeinark on Jun 20, 2011 15:49:50 GMT -5
Lefty: Fantastic photo...did you steal Mike's camera?
|
|
|
|
Post by mike6736 on Jun 20, 2011 21:11:56 GMT -5
HaHa hAAAA...lee, I got some pictures but can't figure out this photo bucket thie with the super large hapng. Lefty gave me the infor and I got the proper cable and loaded some to photo bucket but nothing works when I try the aviator thing or to get pictures out..
Lost in the Icw Age of hipper jipper digital junks......Why I wanna put the wammy with the supper large hammy ojn it...
Mike
|
|
|
|
Post by edfr on Jun 20, 2011 21:40:18 GMT -5
HAHAHAHA!! GOOD ONE LEE,
Mike when you have some time give me a call and be at your computer and logged on to the forum Whichever one This one or ScooterDoc. I will hold your hand and get your pictures on the forum.
LEE what do you think I should charge this turkey ;D
Lefty
|
|
|
|
Post by leeinark on Jun 23, 2011 10:08:51 GMT -5
Lefty: Charge him a lot!!!! He saved a bundle on his initial purchase so he can afford it...old rich bas****! With much respect intended. vr, Lee
|
|
|
|
Post by mike6736 on Jun 23, 2011 10:37:10 GMT -5
All this fun and games at my expemse.......Check is in the mail Rabbit!!!! Going to goof with the spark gap a bit today but have to find the right hammer to get that plug out sure not wanting to damage anything.
Lee have you put 1,000 miles on that trike yet? They are made for scooten.....
Mike
|
|
|
|
Post by leeinark on Jun 23, 2011 21:05:31 GMT -5
No I don't ... been riding the CB 900 too much and driving the sports car when it's too hot. Getting old I guess. That little scooter though cranks first time every time. I start it just about every day.
|
|
.........
........